On Monday, February 11, 2013 12:01:37 PM Bjorn Helgaas wrote:
> [+cc Rafael]
>
> On Mon, Feb 11, 2013 at 10:08 AM, Daniel J Blueman <daniel@xxxxxxxxx> wrote:
> > On 11 February 2013 21:03, Daniel J Blueman <daniel@xxxxxxxxx> wrote:
> >> With 3.8-rc7, when unplugging the Thunderbolt ethernet adapter (bus 0a
> >> [1]) on a Macbook Pro 10,1, we see the PCIe port correctly released:
> >>
> >> pciehp 0000:06:03.0:pcie24: Card not present on Slot(3)
> >> tg3 0000:0a:00.0: tg3_abort_hw timed out, TX_MODE_ENABLE will not
> >> clear MAC_TX_MODE=ffffffff
> >> tg3 0000:0a:00.0 eth0: No firmware running
> >> tg3 0000:0a:00.0 eth0: Link is down
> >> [sched_delayed] sched: RT throttling activated
> >> pcieport 0000:00:01.1: System wakeup enabled by ACPI
> >> pciehp 0000:09:00.0:pcie24: unloading service driver pciehp
> >> pci_bus 0000:0a: busn_res: [bus 0a] is released
> >> pci_bus 0000:09: busn_res: [bus 09-0a] is released
> >>
> >> After some activity later (eg I can reproduce this by switching to a
> >> text console and back), often we'll see an oops:
> >>
> >> Unable to handle kernel paging request at 0000000000001070
> >> pci_pme_list_scan+0x3d/0xe0
> >> Call Trace:
> >> process_one_work+0x193
> >> ? process_one_work+0x131
> >> ? pci_pme_wakeup+0x60
> >> worker_thread+0x15d
> >>
> >> (gdb) list *(pci_pme_list_scan+0x3d)
> >> 0xffffffff8123f6dd is in pci_pme_list_scan (drivers/pci/pci.c:1556).
> >> 1551 /*
> >> 1552 * If bridge is in low power state, the
> >> 1553 * configuration space of subordinate devices
> >> 1554 * may be not accessible
> >> 1555 */
> >> 1556 if (bridge && bridge->current_state != PCI_D0)
> >> 1557 continue;
> >> 1558 pci_pme_wakeup(pme_dev->dev, NULL);
> >> 1559 } else {
> >> 1560 list_del(&pme_dev->list);
> >>
> >> Since a panic in vsnprintf happens after the oops (hence I can't catch
> >> it with EFI pstore), it is almost certainly significant heap
> >> corruption; this would explain why pme_dev became null (the load has
> >> been ordered ahead).
> >>
> >> I'll see what I can find out with memory poisoning and list debugging.
> >
> > Enabling a bunch of related debugging, we see pme_dev is non-null and:
> >
> > BUG: Unable to handle NULL pointer dereference at
> > pci_bus_read_config_word+0x6c
> > PGD 26314c067 PUD 2633f9067 PMD 0
> > Oops: 0000 [#1] SMP
> > pci_check_pme_status+0x4f
> > pci_pme_wakeup+0x21
> > pci_pme_list_scan+0xd5
> > process_one_work+0x1ca
> > ? process_one_work+0x160
> > ? pci_pme_wakeup+0x60
> > worker_thread+0x14e
> >
> > Anyway, it looks like the device being unplugged wasn't removed from
> > pci_pme_list as pci_pme_active(dev, false) wasn't called.
> >
> > From a quick review, I wasn't able to find the right place in the
> > call-chain which I only see releases the child busses and PCIe port
> > drivers. Anyone?
>
> It looks like drivers *add* devices to pci_pme_list when they use
> pci_enable_wake() or pci_wake_from_d3(). But many drivers never
> remove their devices, and I don't see any place where the core does it
> either. My guess is we need to remove it in pci_stop_dev() (we
> already do pcie_aspm_exit_link_state() there) or somewhere similar.
Yes, we should call pci_pme_active(dev, false) somewhere in there I think.
It's fine to call that even if PME was not "active" before.
Thanks,
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
