Re: [PATCH v3 00/22] PCI: Iterate pci host bridge instead of pci root bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em Tue, 5 Feb 2013 16:47:10 -0800
Yinghai Lu <yinghai@xxxxxxxxxx> escreveu:

> On Tue, Feb 5, 2013 at 4:19 PM, Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote:
> >
> > Maybe.  I'd rather not introduce for_each_pci_host_bridge() at all, if
> > we can avoid it.  Every place it's used is a place we have to audit to
> > make sure it's safe.  I think your audit above is correct and
> > complete, but it relies on way too much architecture knowledge.  It's
> > better if we can deduce correctness without knowing which arches
> > support hotplug and which CPUs support EDAC.
> >
> > As soon as for_each_pci_host_bridge() is in the tree, those uses can
> > be copied to even more places.  It's a macro, so it's usable by any
> > module, even out-of-tree ones that we'll never see and can't fix.  So
> > we won't really have a good way to deprecate and remove it.
> 
> Now we only have two references in modules.
> 
> drivers/edac/i7core_edac.c:     for_each_pci_host_bridge(host_bridge) {
> drivers/pci/hotplug/sgi_hotplug.c:      for_each_pci_host_bridge(host_bridge) {
> 
> for the sgi_hotplug.c, it should be same problem that have for acpiphp
> and pciehp.
> need to make it support pci host bridge hotplug anyway.
> 
> for edac, we need to check Mauro about their plan.

The i7core_pci_lastbus() code at i7core_edac is there to make it work
with some Nehalem/Nehalem-EP machines that hide the memory controller's
PCI ID by using an artificially low last bus. There's no plan to
support Nehalem-EX, as the information I got is that there's no way
to access the memory controller registers on it without interfering with
BIOS.

It should be noticed, however, that I got a report of a Sandy Bridge
server that is also hiding the memory controller's PCI address.
So, maybe we'll need to add later some logic at sb_edac to unhide the
memory controller, just like the one in i7core_edac.

> 
> After those two are addressed, we can drop that EXPORT_SYMBOL_GPL for
> pci_get_next_host_bridge.
> 
> We do have pci_get_domain_bus_and_slot() as export symbol.
> So we export pci_get_next_host_bridge should be ok now.
> and it would be better than export root buses list.
> 
> Thanks
> 
> Yinghai


-- 

Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux