On Tue, Jan 29, 2013 at 11:41 AM, Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx> wrote: > On Tue, Jan 29, 2013 at 10:47:09AM -0700, Bjorn Helgaas wrote: > >> As I understand it, the DT is a description of the hardware, so in >> that sense, the DT can't set aside physical address space. It can >> describe what the hardware does with the address space, and I assume >> that's what you mean. Maybe the hardware isn't configurable, e.g., it >> is hard-wired to route certain address ranges to PCIe? > > The DT is largely a description of the hardware, but when it comes to > addresses, particularly HW programmable addresess, there is an general > expectation that the driver/bootloader will program HW address > decoders to either match the addresses given in the DT, or to new > values guided by the DT addresses. > > In a real sense that means the DT also describes the physical address > map the kernel should use. > > In the PCI-E case the DT PCI-E HW description includes physical > address ranges to use for the MMIO/IO/PREFETCH PCI-E interface windows > and the driver is expected to program the internal HW address decoders > based on those address ranges. > > The catch is that the hardware decoders are on a link-by-link basis, > not on a root-complex basis, so the programming can only take place > once the Linux kernel has done PCI resource assignment. > > So when I say set aside, I mean for instance, the PCI-E entry in DT > has 128M of physical address space marked for PCI MMIO use. The kernel > does PCI resource allocation and the HW decoders in each link will be > set to claim some portion of the 128M - based on the MMIO windows > programmed on the PCI-PCI root port bridges. The reamining part of the > 128M is dead address space, not claimed by any hardware block at all. Thanks, this really helps get to the issue that the PCI core will care about. The root ports look like normal bridges, so the core assumes it can manage their windows as needed, as long as the windows stay inside the host bridge apertures that are logically upstream from the root ports. In your example, it sounds like the 128M should be treated as the host bridge aperture. Is there any reason not to do that? It sounds like there's no place you can actually program that 128M region into the hardware, and you would just program pieces of that region as root port windows. But that should be OK from the core's perspective. -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
