From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
pciehp driver traverses pci function deivces by for(fn = 0; fn < 8; fn++) to
configure every pci device when enable or disable slot.
If the pci device to be add/remove is an ARI device, this traversal may
miss some function device configuration, because ari device function
number is up to 255. This patch fix this problem by traversing bus->devices
list to configure pci device.
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Signed-off-by: Yijing Wang <wangyijing@xxxxxxxxxx>
---
drivers/pci/hotplug/pciehp_pci.c | 46 ++++++++++++++------------------------
1 files changed, 17 insertions(+), 29 deletions(-)
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 09cecaf..0cc1977 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -39,7 +39,7 @@ int pciehp_configure_device(struct slot *p_slot)
struct pci_dev *dev;
struct pci_dev *bridge = p_slot->ctrl->pcie->port;
struct pci_bus *parent = bridge->subordinate;
- int num, fn;
+ int num;
struct controller *ctrl = p_slot->ctrl;
dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
@@ -57,28 +57,18 @@ int pciehp_configure_device(struct slot *p_slot)
return -ENODEV;
}
- for (fn = 0; fn < 8; fn++) {
- dev = pci_get_slot(parent, PCI_DEVFN(0, fn));
- if (!dev)
- continue;
+ list_for_each_entry(dev, &parent->devices, bus_list)
if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS))
pci_hp_add_bridge(dev);
- pci_dev_put(dev);
- }
-
+
pci_assign_unassigned_bridge_resources(bridge);
- for (fn = 0; fn < 8; fn++) {
- dev = pci_get_slot(parent, PCI_DEVFN(0, fn));
- if (!dev)
- continue;
- if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
- pci_dev_put(dev);
+ list_for_each_entry(dev, &parent->devices, bus_list) {
+ if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
continue;
- }
+
pci_configure_slot(dev);
- pci_dev_put(dev);
}
pci_bus_add_devices(parent);
@@ -89,9 +79,9 @@ int pciehp_configure_device(struct slot *p_slot)
int pciehp_unconfigure_device(struct slot *p_slot)
{
int ret, rc = 0;
- int j;
u8 bctl = 0;
u8 presence = 0;
+ struct pci_dev *dev, *temp;
struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
u16 command;
struct controller *ctrl = p_slot->ctrl;
@@ -102,33 +92,31 @@ int pciehp_unconfigure_device(struct slot *p_slot)
if (ret)
presence = 0;
- for (j = 0; j < 8; j++) {
- struct pci_dev *temp = pci_get_slot(parent, PCI_DEVFN(0, j));
- if (!temp)
- continue;
- if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
- pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
+ list_for_each_entry_safe(dev, temp, &parent->devices, bus_list) {
+ pci_dev_get(dev);
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
+ pci_read_config_byte(dev, PCI_BRIDGE_CONTROL, &bctl);
if (bctl & PCI_BRIDGE_CTL_VGA) {
ctrl_err(ctrl,
"Cannot remove display device %s\n",
- pci_name(temp));
- pci_dev_put(temp);
+ pci_name(dev));
+ pci_dev_put(dev);
rc = -EINVAL;
break;
}
}
- pci_stop_and_remove_bus_device(temp);
+ pci_stop_and_remove_bus_device(dev);
/*
* Ensure that no new Requests will be generated from
* the device.
*/
if (presence) {
- pci_read_config_word(temp, PCI_COMMAND, &command);
+ pci_read_config_word(dev, PCI_COMMAND, &command);
command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
command |= PCI_COMMAND_INTX_DISABLE;
- pci_write_config_word(temp, PCI_COMMAND, command);
+ pci_write_config_word(dev, PCI_COMMAND, command);
}
- pci_dev_put(temp);
+ pci_dev_put(dev);
}
return rc;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
