On 01/09/2013 01:43 PM, Thierry Reding wrote:
> With the device tree support in place, probe the PCIe controller from
> the device tree and remove the corresponding workaround in the board
> file.
Thierry, there are a couple things missing from this patch; I include a
fixup for you to squash in, but also see beyond that for a problem.
> arch/arm/boot/dts/tegra20-trimslice.dts | 26 +++++++++++++++++++++-----
> 1 file changed, 21 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
> index ebb4c17..41fc45b 100644
> --- a/arch/arm/boot/dts/tegra20-trimslice.dts
> +++ b/arch/arm/boot/dts/tegra20-trimslice.dts
> @@ -303,12 +303,10 @@
>
> pcie-controller {
> status = "okay";
> + pex-clk-supply = <&pci_clk_reg>;
> + vdd-supply = <&pci_vdd_reg>;
>
> - pci@0 {
> - status = "okay";
> - };
> -
> - pci@1 {
> + pci@1,0 {
> status = "okay";
> };
> };
> @@ -366,6 +364,24 @@
> regulator-max-microvolt = <1800000>;
> regulator-always-on;
> };
> +
> + pci_clk_reg: regulator@2 {
> + compatible = "regulator-fixed";
> + reg = <2>;
> + regulator-name = "pci_clk";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + pci_vdd_reg: regulator@3 {
> + compatible = "regulator-fixed";
> + reg = <3>;
> + regulator-name = "pci_vdd";
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-always-on;
> + };
> };
>
> sound {
> --
> 1.7.10.4
However, PCIe still doesn't work on TrimSlice; the device enumeration
fails. The log is below:
> [ 0.790425] tegra-pcie 80003000.pcie-controller: link 0 down, retrying
> [ 0.801351] tegra-pcie 80003000.pcie-controller: PCI host bridge to bus 0000:00
> [ 0.808945] pci_bus 0000:00: root bus resource [io 0x82000000-0x8200ffff]
> [ 0.816109] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xafffffff]
> [ 0.823303] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xbfffffff pref]
> [ 0.830893] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.836728] pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000
> [ 0.843097] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.850047] PCI: bus0: Fast back to back transfers disabled
> [ 0.855853] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> [ 0.864308] tegra-pcie 80003000.pcie-controller: AXI response decoding error, signature: 10010001
> [ 0.873489] tegra-pcie 80003000.pcie-controller: FPCI address: fe10010000
^^^ For some reason, the config register access fails.
> [ 0.880760] PCI: bus1: Fast back to back transfers enabled
> [ 0.886482] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
> [ 0.893381] pci 0000:00:01.0: PCI bridge to [bus 01]
> [ 0.898577] PCI: enabling device 0000:00:01.0 (0140 -> 0143)
> [ 0.904535] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
With plain next-20130109, the device enumeration succeeds.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
