[PATCH 2/3] drm/pci: Set all supported speeds in speed cap mask for pre-3.0 devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For devices that conform to PCIe r3.0 and have a Link Capabilities 2
register, we test and report every bit in the Supported Link Speeds Vector
field.  For a device that supports both 2.5GT/s and 5.0GT/s, we set both
DRM_PCIE_SPEED_25 and DRM_PCIE_SPEED_50 in the returned mask.

For pre-r3.0 devices, the Link Capabilities 0010b encoding
(PCI_EXP_LNKCAP_SLS_5_0GB) means that both 5.0GT/s and 2.5GT/s are
supported, so set both DRM_PCIE_SPEED_25 and DRM_PCIE_SPEED_50 in this
case as well.

Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
 drivers/gpu/drm/drm_pci.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c
index 11c8add..50e26f2 100644
--- a/drivers/gpu/drm/drm_pci.c
+++ b/drivers/gpu/drm/drm_pci.c
@@ -507,7 +507,7 @@ int drm_pcie_get_speed_cap_mask(struct drm_device *dev, u32 *mask)
 		if (lnkcap & PCI_EXP_LNKCAP_SLS_2_5GB)
 			*mask |= DRM_PCIE_SPEED_25;
 		if (lnkcap & PCI_EXP_LNKCAP_SLS_5_0GB)
-			*mask |= DRM_PCIE_SPEED_50;
+			*mask |= (DRM_PCIE_SPEED_25 | DRM_PCIE_SPEED_50);
 	}
 
 	DRM_INFO("probing gen 2 caps for device %x:%x = %x/%x\n", root->vendor, root->device, lnkcap, lnkcap2);

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux