I don't see an SR-IOV capability in your lspci output. Are you sure your 82599 device supports SR-IOV? The SR-IOV capability is a PCIe extended capability, which means it would appear in the 0x100-0xfff extended config space. If your platform doesn't support extended config space, you wouldn't see it. For example, you might not have MMCONFIG enabled. On Wed, Dec 26, 2012 at 8:58 AM, Jiang Liu <liuj97@xxxxxxxxx> wrote: > Hi Lei, > Have you passed the module parameter to enable SR-IOV functions > when loading the ixgbe module? > > max_vfs:Maximum number of virtual functions to allocate per physical function (uint) > > On 12/26/2012 10:26 PM, lei yang wrote: >> I don't know if I'm wrong to ask this question here,if I'm wrong, >> please route me to other list. >> >> >> Lei >> >> root@intel_5500_server:~# lspci --version >> lspci version 3.1.9 >> root@intel_5500_server:~# lspci -vv -s "03:00.0" >> 03:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit >> SFI/SFP+ Network Connection (rev 01) >> Subsystem: Intel Corporation Ethernet Server Adapter X520-1 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx+ >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 26 >> Region 0: Memory at b1900000 (64-bit, prefetchable) [size=512K] >> Region 2: I/O ports at 2000 [size=32] >> Region 4: Memory at b1980000 (64-bit, prefetchable) [size=16K] >> Capabilities: [40] Power Management version 3 >> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) >> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- >> Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ >> Address: 0000000000000000 Data: 0000 >> Masking: 00000000 Pending: 00000000 >> Capabilities: [70] MSI-X: Enable+ Count=64 Masked- >> Vector table: BAR=4 offset=00000000 >> PBA: BAR=4 offset=00002000 >> Capabilities: [a0] Express (v2) Endpoint, MSI 00 >> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us >> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ >> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- >> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- >> MaxPayload 256 bytes, MaxReadReq 512 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- >> LnkCap: Port #2, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <1us, L1 <8us >> ClockPM- Surprise- LLActRep- BwNot- >> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- >> BWMgmt- ABWMgmt- >> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ >> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- >> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, >> Selectable De-emphasis: -6dB >> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- >> ComplianceSOS- >> Compliance De-emphasis: -6dB >> LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, >> EqualizationPhase1- >> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- >> Kernel driver in use: ixgbe >> Kernel modules: ixgbe >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-pci" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
