Re: DMAR and DRHD errors[DMAR:[fault reason 06] PTE Read access is not set] Vt-d & intel_iommu

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 14, 2012 at 12:45 PM, Alex Williamson
<alex.williamson@xxxxxxxxxx> wrote:
> Is the MegaRAID firmware and system management firmware the same as
> well?  Thanks.

I'v updated  all the firmware using Dell's firmware-tools:

# inventory_firmware
Wait while we inventory system:
System inventory:
        BIOS = 6.3.0
        SAS/SATA Backplane 0:0 Backplane Firmware = 1.07
        PERC 6/i Integrated Controller 0 Firmware = 6.3.1-0003
        Dell OS Drivers Pack, v.6.5.3, A00 = 6.5.3
        Dell Lifecycle Controller = 1.5.5.27
        NetXtreme II BCM5709 Gigabit Ethernet rev 20 (eth1) = 7.2.20
        NetXtreme II BCM5709 Gigabit Ethernet rev 20 (eth0) = 7.2.20
        ST3600057SS Firmware = es66
        iDRAC6 = 1.92
        NetXtreme II BCM5709 Gigabit Ethernet rev 20 (eth2) = 7.2.20
        NetXtreme II BCM5709 Gigabit Ethernet rev 20 (eth3) = 7.2.20
        Dell 32 Bit Diagnostics, v.5154A0, 5154.1 = 5154a0
        System BIOS for PowerEdge R710 = 6.3.0

Thanks
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux