On Thu, Aug 16, 2012 at 8:49 AM, Alexander Gordeev <agordeev@xxxxxxxxxx> wrote:
> The new function pci_enable_msi_block_auto() tries to allocate maximum
> possible number of MSIs up to the number the device supports. It
> generalizes a pattern when pci_enable_msi_block() contiguously called
> until it succeeds or fails.
>
> Opposite to pci_enable_msi_block() which takes the number of MSIs to
> allocate as a input parameter, pci_enable_msi_block_auto() could be used
> by device drivers to obtain the number of assigned MSIs.
>
> The function could also be used by device drivers which do not care
> about the exact number of assigned MSIs.
>
> Signed-off-by: Alexander Gordeev <agordeev@xxxxxxxxxx>
> ---
> Documentation/PCI/MSI-HOWTO.txt | 41 ++++++++++++++++++++++++++++++++++----
> drivers/pci/msi.c | 29 +++++++++++++++++++++++++++
> include/linux/pci.h | 7 ++++++
> 3 files changed, 72 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
> index 53e6fca..d5ab6d7 100644
> --- a/Documentation/PCI/MSI-HOWTO.txt
> +++ b/Documentation/PCI/MSI-HOWTO.txt
> @@ -127,15 +127,46 @@ on the number of vectors that can be allocated; pci_enable_msi_block()
> returns as soon as it finds any constraint that doesn't allow the
> call to succeed.
>
> -4.2.3 pci_disable_msi
> +4.2.3 pci_enable_msi_block_auto
> +
> +int pci_enable_msi_block_auto(struct pci_dev *dev, int *count)
> +
> +This variation on pci_enable_msi() call allows a device driver to request
> +the maximum possible number of MSIs. The MSI specification only allows
> +interrupts to be allocated in powers of two, up to a maximum of 2^5 (32).
> +
> +If this function returns 0, it has succeeded in allocating as many
> +interrupts as the device supports.
> +
> +If this function returns a positive number, it indicates that it has
> +succeeded, but the number of allocated interrupts is less than the number
> +of interrupts the device supports. The returned value in this case is the
> +number of allocated interrupts.
Seems like it would be simpler to avoid the special case of returning
zero. You could return a negative value for failure, otherwise return
the number of interrupts allocated.
Then you could also dispense with the "int *count" argument, because
the caller could just look at the return value.
> +In both cases above, the function enables MSI on this device and updates
> +dev->irq to be the lowest of the new interrupts assigned to it. The other
> +interrupts assigned to the device are in the range dev->irq to dev->irq +
> +number of allocated interrupts - 1.
> +
> +If the device driver needs to know the number of allocated interrupts it
> +can pass the pointer count where that number is stored. If the device driver
> +has other means to obtain that number or does not need it, NULL pointer can
> +be passed instead.
> +
> +If this function returns a negative number, it indicates an error and the
> +driver should not attempt to request any more MSI interrupts for this
> +device.
> +
> +4.2.4 pci_disable_msi
>
> void pci_disable_msi(struct pci_dev *dev)
>
> This function should be used to undo the effect of pci_enable_msi() or
> -pci_enable_msi_block(). Calling it restores dev->irq to the pin-based
> -interrupt number and frees the previously allocated message signaled
> -interrupt(s). The interrupt may subsequently be assigned to another
> -device, so drivers should not cache the value of dev->irq.
> +pci_enable_msi_block() or pci_enable_msi_block_auto(). Calling it restores
> +dev->irq to the pin-based interrupt number and frees the previously
> +allocated message signaled interrupt(s). The interrupt may subsequently be
> +assigned to another device, so drivers should not cache the value of
> +dev->irq.
>
> Before calling this function, a device driver must always call free_irq()
> on any interrupt for which it previously called request_irq().
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index f0752d1..ef982c1 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -845,6 +845,35 @@ int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
> }
> EXPORT_SYMBOL(pci_enable_msi_block);
>
> +int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *nvec)
> +{
> + int ret, pos, envec, maxvec;
> + u16 msgctl;
> +
> + pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
> + if (!pos)
> + return -EINVAL;
> +
> + pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl);
> + maxvec = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
> + ret = maxvec;
> +
> + do {
> + envec = ret;
> + ret = pci_enable_msi_block(dev, envec);
> + } while (ret > 0);
> +
> + if (ret < 0)
> + return ret;
> + if (nvec)
> + *nvec = envec;
> + if (envec < maxvec)
> + return envec;
> + return 0;
> +
> +}
> +EXPORT_SYMBOL(pci_enable_msi_block_auto);
> +
> void pci_msi_shutdown(struct pci_dev *dev)
> {
> struct msi_desc *desc;
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index d8c379d..14788d0 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1024,6 +1024,12 @@ static inline int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
> return -1;
> }
>
> +static inline int
> +pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *nvec)
> +{
> + return -1;
> +}
> +
> static inline void pci_msi_shutdown(struct pci_dev *dev)
> { }
> static inline void pci_disable_msi(struct pci_dev *dev)
> @@ -1055,6 +1061,7 @@ static inline int pci_msi_enabled(void)
> }
> #else
> extern int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec);
> +extern int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *nvec);
> extern void pci_msi_shutdown(struct pci_dev *dev);
> extern void pci_disable_msi(struct pci_dev *dev);
> extern int pci_msix_table_size(struct pci_dev *dev);
> --
> 1.7.7.6
>
>
> --
> Regards,
> Alexander Gordeev
> agordeev@xxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
