ELBI regitsers are optional registers and not been using in this
platform. Having this register as required is not allowing to enable
ECAM feature of the PCIe cleanly. ECAM feature needs to do single
remap of entire 256MB which includes DBI and ELBI. Having optional
ELBI registers in the devicetree and binding is causing resorce
conflicts when enabling ECAM feature.
So, make ELBI registers as optional one.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
index 76cb9fbfd476..326059a59b61 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
@@ -19,17 +19,17 @@ properties:
const: qcom,pcie-sc7280
reg:
- minItems: 5
+ minItems: 4
maxItems: 6
reg-names:
- minItems: 5
+ minItems: 4
items:
- const: parf # Qualcomm specific registers
- const: dbi # DesignWare PCIe registers
- - const: elbi # External local bus interface registers
- const: atu # ATU address space
- const: config # PCIe configuration space
+ - const: elbi # External local bus interface registers
- const: mhi # MHI registers
clocks:
@@ -94,10 +94,9 @@ examples:
compatible = "qcom,pcie-sc7280";
reg = <0 0x01c08000 0 0x3000>,
<0 0x40000000 0 0xf1d>,
- <0 0x40000f20 0 0xa8>,
<0 0x40001000 0 0x1000>,
<0 0x40100000 0 0x100000>;
- reg-names = "parf", "dbi", "elbi", "atu", "config";
+ reg-names = "parf", "dbi", "atu", "config";
ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
--
2.34.1
