On Fri, Feb 07, 2025 at 04:58:58AM +0530, Krishna Chaitanya Chundru wrote:
> dw_pcie_ecam_supported() needs to read bus-range to find the maximum
> bus range value. The devm_pci_alloc_host_bridge() is already reading
> bus range and storing it in host bridge.If devm_pci_alloc_host_bridge()
> moved to start of the controller probe, the dt reading can be avoided
> and use values stored in the host bridge.
>
> Allow DWC glue drivers to allocate the host bridge, avoiding redundant
> device tree reads primarily in dw_pcie_ecam_supported().
>
> Suggested-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
> ---
> drivers/pci/controller/dwc/pcie-designware-host.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index 826ff9338646..a18cb1e411e4 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -484,8 +484,8 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
> struct device *dev = pci->dev;
> struct device_node *np = dev->of_node;
> struct platform_device *pdev = to_platform_device(dev);
> + struct pci_host_bridge *bridge = pp->bridge;
> struct resource_entry *win;
> - struct pci_host_bridge *bridge;
> struct resource *res;
> int ret;
>
> @@ -527,7 +527,12 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
> if (!bridge)
> return -ENOMEM;
>
> - pp->bridge = bridge;
> + if (!pp->bridge) {
'pp->bridge' is getting dereferenced above as I indicated in patch 1.
> + bridge = devm_pci_alloc_host_bridge(dev, 0);
> + if (!bridge)
> + return -ENOMEM;
> + pp->bridge = bridge;
There is already a previous devm_pci_alloc_host_bridge() call before this and
you are just duplicating the code here.
- Mani
--
மணிவண்ணன் சதாசிவம்
