On 1/23/25 13:51, Jiwei Sun wrote:
> From: Jiwei Sun <sunjw10@xxxxxxxxxx>
>
> Since commit de9a6c8d5dbf ("PCI/bwctrl: Add pcie_set_target_speed() to set
> PCIe Link Speed"), there are two potential issues in the function
> pcie_failed_link_retrain().
>
> (1) The macro PCIE_LNKCTL2_TLS2SPEED() and PCIE_LNKCAP_SLS2SPEED() just
> use the link speed field of the registers. However, there are many other
> different function fields in the Link Control 2 Register or the Link
> Capabilities Register. If the register value is directly used by the two
> macros, it may cause getting an error link speed value (PCI_SPEED_UNKNOWN).
>
> (2) In the pcie_failed_link_retrain(), the local variable lnkctl2 is not
> changed after reading from PCI_EXP_LNKCTL2. It might cause that the
> removing 2.5GT/s downstream link speed restriction codes are not executed.
>
> In order to avoid the above-mentioned potential issues, only keep link
> speed field of the two registers before using and reread the Link Control 2
> Register before using.
>
> This series focuses on the first patch of the original series [1]. The
> second one of the original series will submitted via the other single
> patch.
>
> [1] https://lore.kernel.org/linux-pci/tencent_DD9CBE5B44210B43A04EF8DAF52506A08509@xxxxxx/
> ---
> v4 changes:
> - rename the variable name in the macro
>
> v3 changes:
> - add fix tag in the commit messages of first patch
> - add an empty line after the local variable definition in the macro
> - adjust the position of reading the Link Control 2 register in the code
>
> v2 changes:
> - divide the two issues into different patches
> - get fixed inside the macros
>
> Jiwei Sun (2):
> PCI: Fix the wrong reading of register fields
> PCI: Adjust the position of reading the Link Control 2 register
>
> drivers/pci/pci.h | 32 +++++++++++++++++++-------------
> drivers/pci/quirks.c | 6 ++++--
> 2 files changed, 23 insertions(+), 15 deletions(-)
>
Gentle ping.
Thanks,
Regards,
Jiwei
