This patch fixes the following bug: http://marc.info/?l=linux-pci&m=134329923124234&w=2 The root cause of the bug is as follow. If a device is not bound with the corresponding driver, the device runtime PM will be disabled and the device will be put into suspended state. So that, the bridge/PCIe port connected to it may be put into suspended and low power state. When do probing for the device later, because the bridge/PCIe port connected to it is in low power state, the IO access to device may fail. To solve the issue, the bridge/PCIe port connected to the device is put into active state before probing. Reported-by: Bjorn Mork <bjorn@xxxxxxx> Signed-off-by: Huang Ying <ying.huang@xxxxxxxxx> --- drivers/pci/pci-driver.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -280,8 +280,12 @@ static long local_pci_probe(void *_ddi) { struct drv_dev_and_id *ddi = _ddi; struct device *dev = &ddi->dev->dev; + struct device *parent = dev->parent; int rc; + /* The parent bridge must be in active state when probing */ + if (parent) + pm_runtime_get_sync(parent); /* Unbound PCI devices are always set to disabled and suspended. * During probe, the device is set to enabled and active and the * usage count is incremented. If the driver supports runtime PM, @@ -298,6 +302,8 @@ static long local_pci_probe(void *_ddi) pm_runtime_set_suspended(dev); pm_runtime_put_noidle(dev); } + if (parent) + pm_runtime_put(parent); return rc; } -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
