Hi Miguel, Could you please help to check whether all serial ports work as expected with the "irqpoll" kernel boot option? Seems something is wrong with the interrupt routine. On 08/02/2012 06:28 PM, Miguel Ángel Álvarez wrote: > Dear all, > > I have a 1 to 4 PCIe switch connected to a root port of a P2020. > > I am attaching a PCIe board to each one of the download ports of the > switch (same kind of card with four serial ports in each one of them). > > When booting Linux, all cards are detected, so I can see them in > /sys/bus/pci/devices. All 16 ttyS* are created. However, when trying > to use them, I have no problems when using the serial ports of the > card in the last downstream port of the switch, but if I try to use > any of the others I obtain the following error: > > irq 16: nobody cared (try booting with the "irqpoll" option) > Call Trace: > [df83fca0] [c0007540] show_stack+0x84/0x1b0 (unreliable) > [df83fcd8] [c0077324] __report_bad_irq+0x5c/0xe0 > [df83fcf0] [c0077534] note_interrupt+0x18c/0x238 > [df83fd10] [c0078520] handle_fasteoi_irq+0xe4/0x134 > [df83fd28] [c0004ea0] handle_one_irq+0x30/0x44 > [df83fd38] [c000c078] __ipipe_do_IRQ+0x84/0xc0 > [df83fd58] [c007bdc8] __ipipe_sync_stage+0x210/0x3b8 > [df83fdb0] [c007cf40] __ipipe_unstall_root+0x60/0x74 > [df83fdb8] [c0047798] __do_softirq+0xd8/0x200 > [df83fe08] [c0004d50] do_softirq+0x60/0x80 > [df83fe18] [c004751c] irq_exit+0x54/0xac > [df83fe20] [c000c07c] __ipipe_do_IRQ+0x88/0xc0 > [df83fe40] [c007bdc8] __ipipe_sync_stage+0x210/0x3b8 > [df83fe98] [c000ba7c] __ipipe_handle_irq+0x1c4/0x1f8 > [df83fec8] [c000bd80] __ipipe_grab_irq+0x15c/0x1f0 > [df83fee8] [c001323c] __ipipe_ret_from_except+0x0/0xc > [df83ffa8] [c0008684] cpu_idle+0x68/0xe0 > [df83ffc0] [c0544c2c] start_secondary+0x314/0x350 > [df83fff0] [c0001c9c] __secondary_start+0x30/0x84 > handlers: > [<c0336e80>] (serial8250_interrupt+0x0/0x148) > Disabling IRQ #16 > > What I can see from /sys/bus/pci/devices/*/irq is that one irq is > assigned to each card; 16 for the first, 17 for the second, 18 for the > third and 19 for the last (and successfull) one. > > My question is... where are irqs mapped for the pci express cards? I > have backtrace the code to pci_device_probe in pci-driver.c, but there > it seems that the irqs are already assigned. > > I have searched the web, but have not found the clue that makes me > understand the process. > > Any ideas? > > Thanks > > Miguel Ángel > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
