On Mon, 2012-07-30 at 10:19 -0400, Alan Stern wrote: > On Mon, 30 Jul 2012, Huang Ying wrote: > > > > Yup, that worked in the quick test I just did. > > > > > > lspci reading the device config will still not wake the bridge, but I > > > assume that is intentional? But loading the device driver now wakes > > > both the bridge and the device, so that works. > > > > Do you have time to test the following patch to fix the lspci issue? > > > > Subject: [BUGFIX] PCI/PM: Keep parent bridge active when read/write config reg > > > > This patch fixes the following bug: > > > > http://marc.info/?l=linux-pci&m=134338059022620&w=2 > > > > Where lspci does not work properly if a device and the corresponding > > parent bridge (such as PCIe port) is suspended. This is because the > > device configuration space registers will be not accessible if the > > corresponding parent bridge is suspended. > > > > To solve the issue, the bridge/PCIe port connected to the device is > > put into active state before read/write configuration space registers. > > What happens when you run lspci and the device is in D3cold? Then even > if the parent bridge is active, lspci will still fail. > > It seems that in this case you need to resume the device itself, not > just its parent. How about the following patch? Subject: [BUGFIX] PCI/PM: Keep parent bridge active when read/write config reg This patch fixes the following bug: http://marc.info/?l=linux-pci&m=134338059022620&w=2 Where lspci does not work properly if a device and the corresponding parent bridge (such as PCIe port) is suspended. This is because the device configuration space registers will be not accessible if the corresponding parent bridge is suspended or the device is put into D3cold state. To solve the issue, the bridge/PCIe port connected to the device is put into active state before read/write configuration space registers. If the device is in D3cold state, it will be put into active state too. To avoid resume/suspend PCIe port for each configuration register read/write, a small delay is added before the PCIe port to go suspended. Reported-by: Bjorn Mork <bjorn@xxxxxxx> Signed-off-by: Huang Ying <ying.huang@xxxxxxxxx> --- drivers/pci/pci-sysfs.c | 68 ++++++++++++++++++++++++++++++----------- drivers/pci/pcie/portdrv_pci.c | 9 +++++ 2 files changed, 60 insertions(+), 17 deletions(-) --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -463,15 +463,17 @@ pci_read_config(struct file *filp, struc struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { - struct pci_dev *dev = to_pci_dev(container_of(kobj,struct device,kobj)); + struct device *dev = container_of(kobj,struct device,kobj); + struct pci_dev *pdev = to_pci_dev(dev); + struct device *parent = dev->parent; unsigned int size = 64; loff_t init_off = off; u8 *data = (u8*) buf; /* Several chips lock up trying to read undefined config space */ if (security_capable(filp->f_cred, &init_user_ns, CAP_SYS_ADMIN) == 0) { - size = dev->cfg_size; - } else if (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { + size = pdev->cfg_size; + } else if (pdev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { size = 128; } @@ -484,9 +486,20 @@ pci_read_config(struct file *filp, struc size = count; } + if (parent) + pm_runtime_get_sync(parent); + pm_runtime_get_noresume(dev); + /* + * pdev->current_state is set to PCI_D3cold during suspending, + * so wait until suspending completes + */ + pm_runtime_barrier(dev); + if (pdev->current_state == PCI_D3cold) + pm_runtime_resume(dev); + if ((off & 1) && size) { u8 val; - pci_user_read_config_byte(dev, off, &val); + pci_user_read_config_byte(pdev, off, &val); data[off - init_off] = val; off++; size--; @@ -494,7 +507,7 @@ pci_read_config(struct file *filp, struc if ((off & 3) && size > 2) { u16 val; - pci_user_read_config_word(dev, off, &val); + pci_user_read_config_word(pdev, off, &val); data[off - init_off] = val & 0xff; data[off - init_off + 1] = (val >> 8) & 0xff; off += 2; @@ -503,7 +516,7 @@ pci_read_config(struct file *filp, struc while (size > 3) { u32 val; - pci_user_read_config_dword(dev, off, &val); + pci_user_read_config_dword(pdev, off, &val); data[off - init_off] = val & 0xff; data[off - init_off + 1] = (val >> 8) & 0xff; data[off - init_off + 2] = (val >> 16) & 0xff; @@ -514,7 +527,7 @@ pci_read_config(struct file *filp, struc if (size >= 2) { u16 val; - pci_user_read_config_word(dev, off, &val); + pci_user_read_config_word(pdev, off, &val); data[off - init_off] = val & 0xff; data[off - init_off + 1] = (val >> 8) & 0xff; off += 2; @@ -523,12 +536,16 @@ pci_read_config(struct file *filp, struc if (size > 0) { u8 val; - pci_user_read_config_byte(dev, off, &val); + pci_user_read_config_byte(pdev, off, &val); data[off - init_off] = val; off++; --size; } + pm_runtime_put(dev); + if (parent) + pm_runtime_put(parent); + return count; } @@ -537,20 +554,33 @@ pci_write_config(struct file* filp, stru struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { - struct pci_dev *dev = to_pci_dev(container_of(kobj,struct device,kobj)); + struct device *dev = container_of(kobj,struct device,kobj); + struct pci_dev *pdev = to_pci_dev(dev); + struct device *parent = dev->parent; unsigned int size = count; loff_t init_off = off; u8 *data = (u8*) buf; - if (off > dev->cfg_size) + if (off > pdev->cfg_size) return 0; - if (off + count > dev->cfg_size) { - size = dev->cfg_size - off; + if (off + count > pdev->cfg_size) { + size = pdev->cfg_size - off; count = size; } + if (parent) + pm_runtime_get_sync(parent); + pm_runtime_get_noresume(dev); + /* + * pdev->current_state is set to PCI_D3cold during suspending, + * so wait until suspending completes + */ + pm_runtime_barrier(dev); + if (pdev->current_state == PCI_D3cold) + pm_runtime_resume(dev); + if ((off & 1) && size) { - pci_user_write_config_byte(dev, off, data[off - init_off]); + pci_user_write_config_byte(pdev, off, data[off - init_off]); off++; size--; } @@ -558,7 +588,7 @@ pci_write_config(struct file* filp, stru if ((off & 3) && size > 2) { u16 val = data[off - init_off]; val |= (u16) data[off - init_off + 1] << 8; - pci_user_write_config_word(dev, off, val); + pci_user_write_config_word(pdev, off, val); off += 2; size -= 2; } @@ -568,7 +598,7 @@ pci_write_config(struct file* filp, stru val |= (u32) data[off - init_off + 1] << 8; val |= (u32) data[off - init_off + 2] << 16; val |= (u32) data[off - init_off + 3] << 24; - pci_user_write_config_dword(dev, off, val); + pci_user_write_config_dword(pdev, off, val); off += 4; size -= 4; } @@ -576,17 +606,21 @@ pci_write_config(struct file* filp, stru if (size >= 2) { u16 val = data[off - init_off]; val |= (u16) data[off - init_off + 1] << 8; - pci_user_write_config_word(dev, off, val); + pci_user_write_config_word(pdev, off, val); off += 2; size -= 2; } if (size) { - pci_user_write_config_byte(dev, off, data[off - init_off]); + pci_user_write_config_byte(pdev, off, data[off - init_off]); off++; --size; } + pm_runtime_put(dev); + if (parent) + pm_runtime_put(parent); + return count; } --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -140,9 +140,17 @@ static int pcie_port_runtime_resume(stru { return 0; } + +static int pcie_port_runtime_idle(struct device *dev) +{ + /* Delay for a short while to prevent too frequent suspend/resume */ + pm_schedule_suspend(dev, 10); + return -EBUSY; +} #else #define pcie_port_runtime_suspend NULL #define pcie_port_runtime_resume NULL +#define pcie_port_runtime_idle NULL #endif static const struct dev_pm_ops pcie_portdrv_pm_ops = { @@ -155,6 +163,7 @@ static const struct dev_pm_ops pcie_port .resume_noirq = pcie_port_resume_noirq, .runtime_suspend = pcie_port_runtime_suspend, .runtime_resume = pcie_port_runtime_resume, + .runtime_idle = pcie_port_runtime_idle, }; #define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops) -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
