The OHCI controller (rev 0x02) under LS7A PCI host has a hardware flaw.
MMIO register with offset 0x60/0x64 is treated as legacy PS2-compatible
keyboard/mouse interface, which confuse the OHCI controller. Since OHCI
only use a 4KB BAR resource indeed, the LS7A OHCI controller's 32KB BAR
is wrapped around (the second 4KB BAR space is the same as the first 4KB
internally). So we can add an 4KB offset (0x1000) to the BAR resource as
a workaround.
Signed-off-by: Huacai Chen <chenhuacai@xxxxxxxxxxx>
---
drivers/pci/controller/pci-loongson.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
index bc630ab8a283..977f7b15f3a7 100644
--- a/drivers/pci/controller/pci-loongson.c
+++ b/drivers/pci/controller/pci-loongson.c
@@ -32,6 +32,7 @@
#define DEV_LS7A_CONF 0x7a10
#define DEV_LS7A_GNET 0x7a13
#define DEV_LS7A_EHCI 0x7a14
+#define DEV_LS7A_OHCI 0x7a24
#define DEV_LS7A_DC2 0x7a36
#define DEV_LS7A_HDMI 0x7a37
@@ -144,6 +145,13 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
DEV_LS7A_PCIE_PORT6, loongson_mrrs_quirk);
+static void loongson_ohci_quirk(struct pci_dev *dev)
+{
+ if (dev->revision == 0x2)
+ dev->resource[0].start += 0x1000;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, DEV_LS7A_OHCI, loongson_ohci_quirk);
+
static void loongson_pci_pin_quirk(struct pci_dev *pdev)
{
pdev->pin = 1 + (PCI_FUNC(pdev->devfn) & 3);
--
2.47.1
