Since mtk_pcie_en7581_power_up() runs in non-atomic context, rely on msleep() routine instead of mdelay(). Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx> --- drivers/pci/controller/pcie-mediatek-gen3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c index 01e0b53cc1f22fc4b9270a2eb6a55e8948ba2f8b..aa511965eb914f7e58e78194491ca7a23790b99d 100644 --- a/drivers/pci/controller/pcie-mediatek-gen3.c +++ b/drivers/pci/controller/pcie-mediatek-gen3.c @@ -923,7 +923,7 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie) reset_control_assert(pcie->mac_reset); /* Wait for the time needed to complete the reset lines assert. */ - mdelay(PCIE_EN7581_RESET_TIME_MS); + msleep(PCIE_EN7581_RESET_TIME_MS); /* * Unlike the other MediaTek Gen3 controllers, the Airoha EN7581 @@ -951,7 +951,7 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie) * Wait for the time needed to complete the bulk de-assert above. * This time is specific for EN7581 SoC. */ - mdelay(PCIE_EN7581_RESET_TIME_MS); + msleep(PCIE_EN7581_RESET_TIME_MS); pm_runtime_enable(dev); pm_runtime_get_sync(dev); -- 2.47.1
