Il 03/01/25 07:00, Jianjun Wang ha scritto:
Disable ASPM L0s support because it does not significantly save power
but impacts performance.
That may be a good idea but, without numbers to support your statement, it's a bit
difficult to say.
How much power does ASPM L0s save on MediaTek SoCs, in microwatts?
How is the performance impacted, and on which specific device(s) on the PCIe bus?
Cheers,
Angelo
Signed-off-by: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
---
drivers/pci/controller/pcie-mediatek-gen3.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index ed3c0614486c..4bd3b39eebe2 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -84,6 +84,9 @@
#define PCIE_MSI_SET_ENABLE_REG 0x190
#define PCIE_MSI_SET_ENABLE GENMASK(PCIE_MSI_SET_NUM - 1, 0)
+#define PCIE_LOW_POWER_CTRL_REG 0x194
+#define PCIE_FORCE_DIS_L0S BIT(8)
+
#define PCIE_PIPE4_PIE8_REG 0x338
#define PCIE_K_FINETUNE_MAX GENMASK(5, 0)
#define PCIE_K_FINETUNE_ERR GENMASK(7, 6)
@@ -458,6 +461,14 @@ static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie)
val &= ~PCIE_INTX_ENABLE;
writel_relaxed(val, pcie->base + PCIE_INT_ENABLE_REG);
+ /*
+ * Disable L0s support because it does not significantly save power
+ * but impacts performance.
+ */
+ val = readl_relaxed(pcie->base + PCIE_LOW_POWER_CTRL_REG);
+ val |= PCIE_FORCE_DIS_L0S;
+ writel_relaxed(val, pcie->base + PCIE_LOW_POWER_CTRL_REG);
+
/* Disable DVFSRC voltage request */
val = readl_relaxed(pcie->base + PCIE_MISC_CTRL_REG);
val |= PCIE_DISABLE_DVFSRC_VLT_REQ;
