When an AER event occurs not all of the print notifications are at the same log level. This can cause an incomplete AER log from the users point of view when monitoring the console output. The completion message in do_recovery() is currently set to KERN_DEBUG (log level 7) while the starting message in aer_port_info() uses KERN_INFO(log level 6). The completion message should be set to KERN_INFO so it is consistent with the starting message in the log. The message has also been re-worded to make it more clear. This patch will enable the AER log on the console output to be book-ended by a clear and consistent starting and completion message. Signed-off-by: Lance Ortiz <lance.ortiz@xxxxxx> --- drivers/pci/pcie/aer/aerdrv_core.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 0ca0535..164bab5 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -540,14 +540,14 @@ static void do_recovery(struct pci_dev *dev, int severity) "resume", report_resume); - dev_printk(KERN_DEBUG, &dev->dev, - "AER driver successfully recovered\n"); + dev_printk(KERN_INFO, &dev->dev, + "AER: Device recovery successful\n"); return; failed: /* TODO: Should kernel panic here? */ - dev_printk(KERN_DEBUG, &dev->dev, - "AER driver didn't recover\n"); + dev_printk(KERN_INFO, &dev->dev, + "AER: Device recovery failed\n"); } /** -- 1.7.7.6 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
