Hello,
> This series adds some extra checks to ensure that it is not possible to
> program the iATU with an address which we did not intend to use.
>
> If these checks were in place when testing some of the earlier revisions
> of Frank's doorbell patches (which did not handle fixed BARs properly),
> we would gotten an error, rather than silently using an address which we
> did not intend to use.
>
> Having these checks in place will hopefully avoid similar debugging in the
> future.
Applied to endpoint, thank you!
[01/06] PCI: dwc: ep: Write BAR_MASK before iATU registers in pci_epc_set_bar()
https://git.kernel.org/pci/pci/c/33a6938e0c33
[02/06] PCI: dwc: ep: Prevent changing BAR size/flags in pci_epc_set_bar()
https://git.kernel.org/pci/pci/c/3708acbd5f16
[03/06] PCI: dwc: ep: Add 'address' alignment to 'size' check in dw_pcie_prog_ep_inbound_atu()
https://git.kernel.org/pci/pci/c/129f6af747b2
[04/06] PCI: artpec6: Implement dw_pcie_ep operation get_features
https://git.kernel.org/pci/pci/c/b61fef0813cb
[05/06] PCI: endpoint: Add size check for fixed size BARs in pci_epc_set_bar()
https://git.kernel.org/pci/pci/c/f015b53d634a
[06/06] PCI: endpoint: Verify that requested BAR size is a power of two
https://git.kernel.org/pci/pci/c/0e7faea1880c
Krzysztof
