On Mon, Dec 16, 2024 at 11:02:07AM +0100, Christian Bruel wrote:
> Hi Manivanna,
>
> On 12/3/24 16:22, Manivannan Sadhasivam wrote:
> > On Tue, Nov 26, 2024 at 04:51:18PM +0100, Christian Bruel wrote:
> >
> > [...]
> >
> > > +static int stm32_pcie_start_link(struct dw_pcie *pci)
> > > +{
> > > + struct stm32_pcie *stm32_pcie = to_stm32_pcie(pci);
> > > + int ret;
> > > +
> > > + if (stm32_pcie->link_status == STM32_PCIE_EP_LINK_ENABLED) {
> > > + dev_dbg(pci->dev, "Link is already enabled\n");
> > > + return 0;
> > > + }
> > > +
> > > + ret = stm32_pcie_enable_link(pci);
> > > + if (ret) {
> > > + dev_err(pci->dev, "PCIe cannot establish link: %d\n", ret);
> > > + return ret;
> > > + }
> >
> > How the REFCLK is supplied to the endpoint? From host or generated locally?
>
> From Host only, we don't support the separated clock model.
>
OK. So even without refclk you are still able to access the controller
registers? So the controller CSRs should be accessible by separate local clock I
believe.
Anyhow, please add this limitation (refclk dependency from host) in commit
message.
[...]
> > > + ret = phy_set_mode(stm32_pcie->phy, PHY_MODE_PCIE);
> >
> > Hmm, so PHY mode is common for both endpoint and host?
>
> Yes it is. We need to init the phy here because it is a clock source for the
> PCIe core clk
>
Clock source? Is it coming directly to PCIe or through RCC? There is no direct
clock representation from PHY to PCIe in DT binding.
- Mani
--
மணிவண்ணன் சதாசிவம்
