[PATCH 3/4] arm64: dts: qcom: ipq5424: Add PCIe PHYs and controller nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add PCIe0, PCIe1, PCIe2, PCIe3 (and corresponding PHY) devices
found on IPQ5424 platform. The PCIe0 & PCIe1 are 1-lane Gen3
host whereas PCIe2 & PCIe3 are 2-lane Gen3 host.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq5424.dtsi | 482 +++++++++++++++++++++++++-
 1 file changed, 477 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index 5e219f900412..ade512bcb180 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,ipq5424-gcc.h>
 #include <dt-bindings/reset/qcom,ipq5424-gcc.h>
+#include <dt-bindings/interconnect/qcom,ipq5424.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -143,7 +144,99 @@ soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
-		ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x0 0xffffffff>;
+
+		pcie0_phy: phy@84000 {
+			compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x1-pcie-phy";
+			reg = <0 0x00084000 0 0x2000>;
+			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie0_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@8c000 {
+			compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x1-pcie-phy";
+			reg = <0 0x0008c000 0 0x2000>;
+			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE1_PHY_BCR>,
+				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie1_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie2_phy: phy@f4000 {
+			compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x2-pcie-phy";
+			reg = <0 0x000f4000 0 0x2000>;
+			clocks = <&gcc GCC_PCIE2_AUX_CLK>,
+				 <&gcc GCC_PCIE2_AHB_CLK>,
+				 <&gcc GCC_PCIE2_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE2_PHY_BCR>,
+				 <&gcc GCC_PCIE2PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie2_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie3_phy: phy@fc000 {
+			compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy",
+				     "qcom,ipq9574-qmp-gen3x2-pcie-phy";
+			reg = <0 0x000fc000 0 0x2000>;
+			clocks = <&gcc GCC_PCIE3_AUX_CLK>,
+				 <&gcc GCC_PCIE3_AHB_CLK>,
+				 <&gcc GCC_PCIE3_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>;
+			assigned-clock-rates = <20000000>;
+
+			resets = <&gcc GCC_PCIE3_PHY_BCR>,
+				 <&gcc GCC_PCIE3PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <0>;
+			clock-output-names = "gcc_pcie3_pipe_clk_src";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
 
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5424-tlmm";
@@ -168,11 +261,11 @@ gcc: clock-controller@1800000 {
 			reg = <0 0x01800000 0 0x40000>;
 			clocks = <&xo_board>,
 				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>;
+				 <&pcie2_phy>,
+				 <&pcie3_phy>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#interconnect-cells = <1>;
@@ -292,6 +385,385 @@ frame@f42d000 {
 			};
 		};
 
+		pcie3: pcie@40000000 {
+			compatible = "qcom,pcie-ipq5424",
+				     "qcom,pcie-ipq9574";
+			reg = <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x000f8000 0 0x3000>,
+			      <0 0x40100000 0 0x1000>;
+			reg-names = "dbi", "elbi", "atu", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <3>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x0fd00000>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 479 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 480 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 481 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 482 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
+				 <&gcc GCC_PCIE3_AXI_S_CLK>,
+				 <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE3_RCHNG_CLK>,
+				 <&gcc GCC_PCIE3_AHB_CLK>,
+				 <&gcc GCC_PCIE3_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE3_AHB_CLK>,
+					  <&gcc GCC_PCIE3_AUX_CLK>,
+					  <&gcc GCC_PCIE3_AXI_M_CLK>,
+					  <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>,
+					  <&gcc GCC_PCIE3_AXI_S_CLK>,
+					  <&gcc GCC_PCIE3_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>,
+					       <20000000>,
+					       <266666666>,
+					       <240000000>,
+					       <240000000>,
+					       <100000000>;
+
+			resets = <&gcc GCC_PCIE3_PIPE_ARES>,
+				 <&gcc GCC_PCIE3_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE3_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE3_AXI_S_ARES>,
+				 <&gcc GCC_PCIE3_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE3_AXI_M_ARES>,
+				 <&gcc GCC_PCIE3_AUX_ARES>,
+				 <&gcc GCC_PCIE3_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			phys = <&pcie3_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>,
+					<&gcc MASTER_CNOC_PCIE3 &gcc SLAVE_CNOC_PCIE3>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+			status = "disabled";
+		};
+
+		pcie2: pcie@50000000 {
+			compatible = "qcom,pcie-ipq5424",
+				     "qcom,pcie-ipq9574";
+			reg = <0 0x50000000 0 0xf1d>,
+			      <0 0x50000f20 0 0xa8>,
+			      <0 0x50001000 0 0x1000>,
+			      <0 0x000f0000 0 0x3000>,
+			      <0 0x50100000 0 0x1000>;
+			reg-names = "dbi", "elbi", "atu", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x50200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x50300000 0x0 0x50300000 0x0 0x0fd00000>;
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 464 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 465 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 466 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 467 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
+				 <&gcc GCC_PCIE2_AXI_S_CLK>,
+				 <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE2_RCHNG_CLK>,
+				 <&gcc GCC_PCIE2_AHB_CLK>,
+				 <&gcc GCC_PCIE2_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE2_AHB_CLK>,
+					  <&gcc GCC_PCIE2_AUX_CLK>,
+					  <&gcc GCC_PCIE2_AXI_M_CLK>,
+					  <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>,
+					  <&gcc GCC_PCIE2_AXI_S_CLK>,
+					  <&gcc GCC_PCIE2_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>,
+					       <20000000>,
+					       <266666666>,
+					       <240000000>,
+					       <240000000>,
+					       <100000000>;
+
+			resets = <&gcc GCC_PCIE2_PIPE_ARES>,
+				 <&gcc GCC_PCIE2_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE2_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE2_AXI_S_ARES>,
+				 <&gcc GCC_PCIE2_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE2_AXI_M_ARES>,
+				 <&gcc GCC_PCIE2_AUX_ARES>,
+				 <&gcc GCC_PCIE2_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			phys = <&pcie2_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>,
+					<&gcc MASTER_CNOC_PCIE2 &gcc SLAVE_CNOC_PCIE2>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+			status = "disabled";
+		};
+
+		pcie1: pcie@60000000 {
+			compatible = "qcom,pcie-ipq5424",
+				     "qcom,pcie-ipq9574";
+			reg = <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x00088000 0 0x3000>,
+			      <0 0x60100000 0 0x1000>;
+			reg-names = "dbi", "elbi", "atu", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x0fd00000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 449 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 450 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 451 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 452 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE1_RCHNG_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE1_AHB_CLK>,
+					  <&gcc GCC_PCIE1_AUX_CLK>,
+					  <&gcc GCC_PCIE1_AXI_M_CLK>,
+					  <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>,
+					  <&gcc GCC_PCIE1_AXI_S_CLK>,
+					  <&gcc GCC_PCIE1_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>,
+					       <20000000>,
+					       <240000000>,
+					       <240000000>,
+					       <240000000>,
+					       <100000000>;
+
+			resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+				 <&gcc GCC_PCIE1_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE1_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE1_AXI_S_ARES>,
+				 <&gcc GCC_PCIE1_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE1_AXI_M_ARES>,
+				 <&gcc GCC_PCIE1_AUX_ARES>,
+				 <&gcc GCC_PCIE1_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE1 &gcc SLAVE_ANOC_PCIE1>,
+					<&gcc MASTER_CNOC_PCIE1 &gcc SLAVE_CNOC_PCIE1>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+			status = "disabled";
+		};
+
+		pcie0: pcie@70000000 {
+			compatible = "qcom,pcie-ipq5424",
+				     "qcom,pcie-ipq9574";
+			reg = <0 0x70000000 0 0xf1d>,
+			      <0 0x70000f20 0 0xa8>,
+			      <0 0x70001000 0 0x1000>,
+			      <0 0x00080000 0 0x3000>,
+			      <0 0x70100000 0 0x1000>;
+			reg-names = "dbi", "elbi", "atu", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x00100000>,
+				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x0fd00000>;
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 436 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 437 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE0_RCHNG_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_AUX_CLK>;
+			clock-names = "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng",
+				      "ahb",
+				      "aux";
+
+			assigned-clocks = <&gcc GCC_PCIE0_AHB_CLK>,
+					  <&gcc GCC_PCIE0_AUX_CLK>,
+					  <&gcc GCC_PCIE0_AXI_M_CLK>,
+					  <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+					  <&gcc GCC_PCIE0_AXI_S_CLK>,
+					  <&gcc GCC_PCIE0_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>,
+					       <20000000>,
+					       <240000000>,
+					       <240000000>,
+					       <240000000>,
+					       <100000000>;
+
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_RESET>,
+				 <&gcc GCC_PCIE0_AXI_S_STICKY_RESET>,
+				 <&gcc GCC_PCIE0_AXI_S_ARES>,
+				 <&gcc GCC_PCIE0_AXI_M_STICKY_RESET>,
+				 <&gcc GCC_PCIE0_AXI_M_ARES>,
+				 <&gcc GCC_PCIE0_AUX_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>;
+			reset-names = "pipe",
+				      "sticky",
+				      "axi_s_sticky",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "axi_m",
+				      "aux",
+				      "ahb";
+
+			msi-map = <0x0 &intc 0x0 0x1000>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+			interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>,
+					<&gcc MASTER_CNOC_PCIE0 &gcc SLAVE_CNOC_PCIE0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+			status = "disabled";
+		};
 	};
 
 	timer {
-- 
2.34.1





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux