On 12/12/2024 11:32, Krishna Chaitanya Chundru wrote: > From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx> > > Add PCIe lane equalization preset properties for 8 GT/s and 16 GT/s data > rates used in lane equalization procedure. > > Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/x1e80100.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi > index a36076e3c56b..6a2074297030 100644 > --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi > +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi > @@ -2993,6 +2993,10 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > phys = <&pcie6a_phy>; > phy-names = "pciephy"; > > + eq-presets-8gts = /bits/ 16 <0x5555 0x5555>; > + > + eq-presets-16gts = /bits/ 8 <0x55 0x55>; NAK for two reasons (stated many times during review): 1. There is no way driver code can depend on DTS, unless you fix something serious but nothing is explained about that serious fix in commit msg. 2. There are no such properties. It does not look like you tested the DTS against bindings. Please run `make dtbs_check W=1` (see Documentation/devicetree/bindings/writing-schema.rst or https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/ for instructions). Best regards, Krzysztof
