On Fri, 13 Sep 2024 17:36:30 +0300
Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> wrote:
> pcie_read_tlp_log() handles only 4 Header Log DWORDs but TLP Prefix Log
> (PCIe r6.1 secs 7.8.4.12 & 7.9.14.13) may also be present.
>
> Generalize pcie_read_tlp_log() and struct pcie_tlp_log to handle also
> TLP Prefix Log. The relevant registers are formatted identically in AER
> and DPC Capability, but has these variations:
>
> a) The offsets of TLP Prefix Log registers vary.
> b) DPC RP PIO TLP Prefix Log register can be < 4 DWORDs.
>
> Therefore callers must pass the offset of the TLP Prefix Log register
> and the entire length to pcie_read_tlp_log() to be able to read the
> correct number of TLP Prefix DWORDs from the correct offset.
>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
Trivial comments below
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Would have been nice if they'd just made the formats have the
same sized holes etc!
> diff --git a/drivers/pci/pcie/tlp.c b/drivers/pci/pcie/tlp.c
> index 65ac7b5d8a87..def9dd7b73e8 100644
> --- a/drivers/pci/pcie/tlp.c
> +++ b/drivers/pci/pcie/tlp.c
> @@ -11,26 +11,65 @@
> /**
> * pcie_read_tlp_log - read TLP Header Log
Maybe update this to read TLP Header and Prefix Logs
> * @dev: PCIe device
> * @where: PCI Config offset of TLP Header Log
> + * @where2: PCI Config offset of TLP Prefix Log
Is it worth giving it a more specific name than where2?
Possibly renaming where as well!
> + * @tlp_len: TLP Log length (Header Log + TLP Prefix Log in DWORDs)
> * @log: TLP Log structure to fill
> *
> * Fill @log from TLP Header Log registers, e.g., AER or DPC.
> *
> * Return: 0 on success and filled TLP Log structure, <0 on error.
> */
> -int pcie_read_tlp_log(struct pci_dev *dev, int where,
> - struct pcie_tlp_log *log)
> +int pcie_read_tlp_log(struct pci_dev *dev, int where, int where2,
> + unsigned int tlp_len, struct pcie_tlp_log *log)
> {
