On Tue, Dec 10, 2024 at 10:55 AM Manivannan Sadhasivam via B4 Relay
<devnull+manivannan.sadhasivam.linaro.org@xxxxxxxxxx> wrote:
>
> Hi,
>
> This series reworks the PCI pwrctrl integration (again) by moving the creation
> and removal of pwrctrl devices to pci_scan_device() and pci_destroy_dev() APIs.
> This is based on the suggestion provided by Lukas Wunner [1][2]. With this
> change, it is now possible to create pwrctrl devices for PCI bridges as well.
> This is required to control the power state of the PCI slots in a system. Since
> the PCI slots are not explicitly defined in devicetree, the agreement is to
> define the supplies for PCI slots in PCI bridge nodes itself [3].
>
> Based on this, a pwrctrl driver to control the supplies of PCI slots are also
> added in patch 4. With this driver, it is now possible to control the voltage
> regulators powering the PCI slots defined in PCI bridge nodes as below:
>
> ```
> pcie@0 {
> compatible "pciclass,0604"
> ...
>
> vpcie12v-supply = <&vpcie12v_reg>;
> vpcie3v3-supply = <&vpcie3v3_reg>;
> vpcie3v3aux-supply = <&vpcie3v3aux_reg>;
> };
> ```
>
> To make use of this driver, the PCI bridge DT node should also have the
> compatible "pciclass,0604". But adding this compatible triggers the following
> checkpatch warning:
>
> WARNING: DT compatible string vendor "pciclass" appears un-documented --
> check ./Documentation/devicetree/bindings/vendor-prefixes.yaml
>
> For fixing it, I added patch 3. But due to some reason, checkpatch is not
> picking the 'pciclass' vendor prefix alone, and requires adding the full
> compatible 'pciclass,0604' in the vendor-prefixes list. Since my perl skills are
> not great, I'm leaving it in the hands of Rob to fix the checkpatch script.
>
> [1] https://lore.kernel.org/linux-pci/Z0yLDBMAsh0yKWf2@xxxxxxxxx
> [2] https://lore.kernel.org/linux-pci/Z0xAdQ2ozspEnV5g@xxxxxxxxx
> [3] https://github.com/devicetree-org/dt-schema/issues/145
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
> Manivannan Sadhasivam (4):
> PCI/pwrctrl: Move creation of pwrctrl devices to pci_scan_device()
> PCI/pwrctrl: Move pci_pwrctrl_unregister() to pci_destroy_dev()
> dt-bindings: vendor-prefixes: Document the 'pciclass' prefix
> PCI/pwrctrl: Add pwrctrl driver for PCI Slots
>
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +-
> drivers/pci/bus.c | 43 ----------
> drivers/pci/probe.c | 34 ++++++++
> drivers/pci/pwrctrl/Kconfig | 11 +++
> drivers/pci/pwrctrl/Makefile | 3 +
> drivers/pci/pwrctrl/core.c | 2 +-
> drivers/pci/pwrctrl/slot.c | 93 ++++++++++++++++++++++
> drivers/pci/remove.c | 2 +-
> 8 files changed, 144 insertions(+), 46 deletions(-)
> ---
> base-commit: 40384c840ea1944d7c5a392e8975ed088ecf0b37
> change-id: 20241210-pci-pwrctrl-slot-02c0ec63172f
>
> Best regards,
> --
> Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
>
>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
