RE: [PATCH 2/2] PCI: amd-mdb: Add AMD MDB Root Port driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sadhasivam,

> -----Original Message-----
> From: manivannan.sadhasivam@xxxxxxxxxx <manivannan.sadhasivam@xxxxxxxxxx>
> Sent: Sunday, December 8, 2024 6:29 PM
> To: Havalige, Thippeswamy <thippeswamy.havalige@xxxxxxx>
> Cc: Bjorn Helgaas <helgaas@xxxxxxxxxx>; bhelgaas@xxxxxxxxxx;
> lpieralisi@xxxxxxxxxx; kw@xxxxxxxxx; robh@xxxxxxxxxx; krzk+dt@xxxxxxxxxx;
> conor+dt@xxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; jingoohan1@xxxxxxxxx; Simek, Michal
> <michal.simek@xxxxxxx>; Gogada, Bharat Kumar
> <bharat.kumar.gogada@xxxxxxx>
> Subject: Re: [PATCH 2/2] PCI: amd-mdb: Add AMD MDB Root Port driver
> 
> On Mon, Dec 02, 2024 at 08:21:36AM +0000, Havalige, Thippeswamy wrote:
> 
> [...]
> 
> > > > +	d = irq_domain_get_irq_data(pcie->mdb_domain, irq);
> > > > +	if (intr_cause[d->hwirq].str)
> > > > +		dev_warn(dev, "%s\n", intr_cause[d->hwirq].str);
> > > > +	else
> > > > +		dev_warn(dev, "Unknown IRQ %ld\n", d->hwirq);
> > > > +
> > > > +	return IRQ_HANDLED;
> > >
> > > I see that some of these messages are "Correctable/Non-Fatal/Fatal error
> > > message"; I assume this Root Port doesn't have an AER Capability, and this
> > > interrupt is the "System Error" controlled by the Root Control Error Enable bits in
> the
> > > PCIe Capability?  (See PCIe r6.0, sec 6.2.6)
> > >
> > > Is there any way to hook this into the AER handling so we can do something
> about
> > > it, since the devices *below* the Root Port may support AER and may have
> useful
> > > information logged?
> > >
> > > Since this is DWC-based, I suppose these are general questions that apply to all
> > > the similar drivers.
> >
> >
> > Thanks for review, We have this in our plan to hook platform specific error
> interrupts
> > to AER in future will add this support.
> >
> 
> So on your platform, AER (also PME) interrupts are reported over SPI interrupt
> only and not through MSI/MSI-X? Most of the DWC controllers have this weird
> behavior of reporting AER/PME only through SPI, but that should be legacy
> controllers. Newer ones does support MSI.

Thanks for your comment, Yes our platform supports platform specific Error 
Interrupts over SPI.

> 
> - Mani
> 
> --
> மணிவண்ணன் சதாசிவம்




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux