Trying to enable bwctrl on a Thunderbolt port causes a boot hang on some
systems though the exact reason is not yet understood. As per the spec
Thunderbolt PCIe Downstream Ports have a fake Max Link Speed of 2.5 GT/s
(USB4 v2 sec 11.2.1):
"Max Link Speed field in the Link Capabilities Register set to 0001b
(data rate of 2.5 GT/s only).
Note: These settings do not represent actual throughput.
Throughput is implementation specific and based on the USB4 Fabric
performance."
More generally if 2.5 GT/s is the only supported link speed there is no
point in throtteling as this is already the lowest possible PCIe speed
so don't advertise the capability stopping bwctrl from being probed on
these ports.
Link: https://lore.kernel.org/linux-pci/Z1R4VNwCOlh9Sg9n@xxxxxxxxx/
Fixes: 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Tested-by: Niklas Schnelle <niks@xxxxxxxxxx>
Signed-off-by: Niklas Schnelle <niks@xxxxxxxxxx>
---
Note: This issue causes a boot hang on my personal workstation see the
Link for details.
---
drivers/pci/pcie/portdrv.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pcie/portdrv.c b/drivers/pci/pcie/portdrv.c
index 5e10306b63081b1ddd13e0a545418e2a8610c14c..e5f80e4a11aad4ce60b2ce998b40ec9fda8c653d 100644
--- a/drivers/pci/pcie/portdrv.c
+++ b/drivers/pci/pcie/portdrv.c
@@ -270,7 +270,8 @@ static int get_port_device_capability(struct pci_dev *dev)
u32 linkcap;
pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &linkcap);
- if (linkcap & PCI_EXP_LNKCAP_LBNC)
+ if (linkcap & PCI_EXP_LNKCAP_LBNC &&
+ (linkcap & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_2_5GB)
services |= PCIE_PORT_SERVICE_BWCTRL;
}
---
base-commit: 40384c840ea1944d7c5a392e8975ed088ecf0b37
change-id: 20241207-fix_bwctrl_thunderbolt-bd1f96b3d98f
Best regards,
--
Niklas Schnelle <niks@xxxxxxxxxx>
