Re: [PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On 20:06 Sun 24 Nov     , Rob Herring (Arm) wrote:
> 
> On Sun, 24 Nov 2024 11:51:41 +0100, Andrea della Porta wrote:
> > The RP1 is a MFD that exposes its peripherals through PCI BARs. This
> > schema is intended as minimal support for the clock generator and
> > gpio controller peripherals which are accessible through BAR1.
> > 
> > Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx>
> > ---
> >  .../devicetree/bindings/misc/pci1de4,1.yaml   | 74 +++++++++++++++++++
> >  MAINTAINERS                                   |  1 +
> >  2 files changed, 75 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/misc/pci1de4,1.yaml
> > 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/misc/pci1de4,1.example.dtb: clocks@c040018000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/clock/raspberrypi,rp1-clocks.yaml#
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/ebb21da5cb41391421b364815705be8b4c415f8a.1732444746.git.andrea.porta@xxxxxxxx
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

Sorry about that, but even if I see that this should be the case (I've dropped
the clock-name property from raspberrypi,rp1-clock.yaml), I can't reproduce it
with:

# make W=1 dt_binding_check DT_SCHEMA_FILES=pci1de4,1.yaml

and the output is:

  CHKDT   Documentation/devicetree/bindings
  LINT    Documentation/devicetree/bindings
  DTEX    Documentation/devicetree/bindings/misc/pci1de4,1.example.dts
  DTC [C] Documentation/devicetree/bindings/misc/pci1de4,1.example.dtb

dt-schema seems up to date. Is my command line correct?

Many thanks,
Andrea





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux