[PATCH v3 3/6] PCI: mediatek-gen3: Move reset/assert callbacks in .power_up()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In order to make the code more readable, the reset_control_bulk_assert()
for PHY reset lines is moved to make it pair with
reset_control_bulk_deassert() in mtk_pcie_power_up() and
mtk_pcie_en7581_power_up(). The same change is done for
reset_control_assert() used to assert MAC reset line.

Introduce PCIE_MTK_RESET_TIME_US macro for the time needed to
complete PCIe reset on MediaTek controller.

Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
---
 drivers/pci/controller/pcie-mediatek-gen3.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index 3cfcb45d31508142d28d338ff213f70de9b4e608..2b80edd4462ad4e9f2a5d192db7f99307113eb8a 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -125,6 +125,8 @@
 
 #define MAX_NUM_PHY_RESETS		3
 
+#define PCIE_MTK_RESET_TIME_US		10
+
 /* Time in ms needed to complete PCIe reset on EN7581 SoC */
 #define PCIE_EN7581_RESET_TIME_MS	100
 
@@ -912,6 +914,14 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
 	int err;
 	u32 val;
 
+	/*
+	 * The controller may have been left out of reset by the bootloader
+	 * so make sure that we get a clean start by asserting resets here.
+	 */
+	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
+				  pcie->phy_resets);
+	reset_control_assert(pcie->mac_reset);
+
 	/*
 	 * Wait for the time needed to complete the bulk assert in
 	 * mtk_pcie_setup for EN7581 SoC.
@@ -986,6 +996,15 @@ static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie)
 	struct device *dev = pcie->dev;
 	int err;
 
+	/*
+	 * The controller may have been left out of reset by the bootloader
+	 * so make sure that we get a clean start by asserting resets here.
+	 */
+	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
+				  pcie->phy_resets);
+	reset_control_assert(pcie->mac_reset);
+	usleep_range(PCIE_MTK_RESET_TIME_US, 2 * PCIE_MTK_RESET_TIME_US);
+
 	/* PHY power on and enable pipe clock */
 	err = reset_control_bulk_deassert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
 	if (err) {
@@ -1070,14 +1089,6 @@ static int mtk_pcie_setup(struct mtk_gen3_pcie *pcie)
 	 * counter since the bulk is shared.
 	 */
 	reset_control_bulk_deassert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
-	/*
-	 * The controller may have been left out of reset by the bootloader
-	 * so make sure that we get a clean start by asserting resets here.
-	 */
-	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
-
-	reset_control_assert(pcie->mac_reset);
-	usleep_range(10, 20);
 
 	/* Don't touch the hardware registers before power up */
 	err = pcie->soc->power_up(pcie);

-- 
2.47.0





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux