On Tue, Nov 12, 2024 at 05:19:23PM +0100, Christian Bruel wrote: > STM32MP25 PCIe Controller is based on the DesignWare core configured as > end point mode from the SYSCFG register. > > Signed-off-by: Christian Bruel <christian.bruel@xxxxxxxxxxx> > --- > .../bindings/pci/st,stm32-pcie-ep.yaml | 97 +++++++++++++++++++ > 1 file changed, 97 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml > > diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml > new file mode 100644 > index 000000000000..f0d215982794 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml > @@ -0,0 +1,97 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/st,stm32-pcie-ep.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: STM32MP25 PCIe endpoint driver > + > +maintainers: > + - Christian Bruel <christian.bruel@xxxxxxxxxxx> > + > +description: > + PCIe endpoint controller based on the Synopsys DesignWare PCIe core. > + > +allOf: > + - $ref: /schemas/pci/snps,dw-pcie-common.yaml# snps,dw-pcie-ep.yaml > + > +properties: > + compatible: > + const: st,stm32mp25-pcie-ep > + > + reg: > + items: > + - description: Data Bus Interface (DBI) registers. > + - description: PCIe configuration registers. > + > + reg-names: > + items: > + - const: dbi > + - const: addr_space > + > + clocks: > + maxItems: 1 > + description: PCIe system clock > + > + clock-names: > + const: core > + > + resets: > + maxItems: 1 > + > + reset-names: > + const: core > + > + phys: > + maxItems: 1 > + > + phy-names: > + const: pcie-phy > + > + reset-gpios: > + description: GPIO controlled connection to PERST# signal > + maxItems: 1 > + > + access-controllers: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 All these properties common between RC and EP modes should be in a shared schema. > + > +required: > + - resets > + - reset-names > + - clocks > + - clock-names > + - phys > + - phy-names > + - reset-gpios > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/st,stm32mp25-rcc.h> > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/phy/phy.h> > + #include <dt-bindings/reset/st,stm32mp25-rcc.h> > + > + pcie-ep@48400000 { > + compatible = "st,stm32mp25-pcie-ep"; > + num-lanes = <1>; > + reg = <0x48400000 0x400000>, > + <0x10000000 0x8000000>; > + reg-names = "dbi", "addr_space"; > + clocks = <&rcc CK_BUS_PCIE>; > + clock-names = "core"; > + phys = <&combophy PHY_TYPE_PCIE>; > + phy-names = "pcie-phy"; > + resets = <&rcc PCIE_R>; > + reset-names = "core"; > + pinctrl-names = "default", "init"; > + pinctrl-0 = <&pcie_pins_a>; > + pinctrl-1 = <&pcie_init_pins_a>; > + reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>; > + power-domains = <&CLUSTER_PD>; > + access-controllers = <&rifsc 68>; > + }; > -- > 2.34.1 >
