On Fri, Nov 15, 2024 at 05:03:21PM +0800, Richard Zhu wrote:
> Before sending PME_TURN_OFF, don't test the LTSSM stat. Since it's safe
s/stat/state
here and below
> to send PME_TURN_OFF message regardless of whether the link is up or
> down. So, there would be no need to test the LTSSM stat before sending
> PME_TURN_OFF message.
>
> Only dump the message when ltssm_stat is not in DETECT and POLL.
s/dump/print
> In the other words, there isn't a notification when no endpoint is
s/notification/error message
> connected at all.
>
> When the endpoint is connected and after PME_TURN_OFF is issued. Just
> print out one information instead of an error and exit, if the link
> doesn't entry DW_PCIE_LTSSM_L2_IDLE stat. Since the recovery would be
> done in the following closely dw_pcie_resume_noirq().
>
How about,
"Also, when the endpoint is connected and PME_TURN_OFF is sent, do not return
error if the link doesn't enter L2. Just print a warning and continue with the
suspend as the link will be recovered in dw_pcie_resume_noirq(). "
> Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
> ---
> .../pci/controller/dwc/pcie-designware-host.c | 37 ++++++++++---------
> drivers/pci/controller/dwc/pcie-designware.h | 1 +
> 2 files changed, 21 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index f7ceeb785fb0..c2053555c44b 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -927,23 +927,26 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
> if (dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKCTL) & PCI_EXP_LNKCTL_ASPM_L1)
> return 0;
>
> - if (dw_pcie_get_ltssm(pci) > DW_PCIE_LTSSM_DETECT_ACT) {
> - /* Only send out PME_TURN_OFF when PCIE link is up */
> - if (pci->pp.ops->pme_turn_off)
> - pci->pp.ops->pme_turn_off(&pci->pp);
> - else
> - ret = dw_pcie_pme_turn_off(pci);
> -
> - if (ret)
> - return ret;
> + if (pci->pp.ops->pme_turn_off)
> + pci->pp.ops->pme_turn_off(&pci->pp);
> + else
> + ret = dw_pcie_pme_turn_off(pci);
> + if (ret)
> + return ret;
>
> - ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
> - PCIE_PME_TO_L2_TIMEOUT_US/10,
> - PCIE_PME_TO_L2_TIMEOUT_US, false, pci);
> - if (ret) {
> - dev_err(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val);
> - return ret;
> - }
> + ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE,
> + PCIE_PME_TO_L2_TIMEOUT_US/10,
> + PCIE_PME_TO_L2_TIMEOUT_US, false, pci);
> + if (ret && (val > DW_PCIE_LTSSM_DETECT_WAIT))
> + /* Only dump message when ltssm_stat isn't in DETECT and POLL */
> + dev_info(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val);
dev_warn() would be more appropriate.
- Mani
> + else
> + /*
> + * Refer to r6.0, sec 5.3.3.2.1, software should wait at least
> + * 100ns after L2/L3 Ready before turning off refclock and
> + * main power. It's harmless too when no endpoint connected.
> + */
> + udelay(1);
> }
>
> dw_pcie_stop_link(pci);
> @@ -952,7 +955,7 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
>
> pci->suspended = true;
>
> - return ret;
> + return 0;
> }
> EXPORT_SYMBOL_GPL(dw_pcie_suspend_noirq);
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 347ab74ac35a..bf036e66717e 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -330,6 +330,7 @@ enum dw_pcie_ltssm {
> /* Need to align with PCIE_PORT_DEBUG0 bits 0:5 */
> DW_PCIE_LTSSM_DETECT_QUIET = 0x0,
> DW_PCIE_LTSSM_DETECT_ACT = 0x1,
> + DW_PCIE_LTSSM_DETECT_WAIT = 0x6,
> DW_PCIE_LTSSM_L0 = 0x11,
> DW_PCIE_LTSSM_L2_IDLE = 0x15,
>
> --
> 2.37.1
>
>
--
மணிவண்ணன் சதாசிவம்
