On Fri, Nov 15, 2024 at 10:15:07AM +0100, Lorenzo Bianconi wrote: > > On Sat, Nov 09, 2024 at 10:28:39AM +0100, Lorenzo Bianconi wrote: > > > In order to make the code more readable, move phy and mac reset lines > > > assert/de-assert configuration in .power_up() callback > > > (mtk_pcie_en7581_power_up()/mtk_pcie_power_up()). > > > > > > > I don't understand how moving the code (duplicting it also) makes the code more > > readable. Could you please explain? > > Hi Manivannan, > > this has been requested by Bjorn in > https://patchwork.kernel.org/project/linux-pci/patch/aca00bd672ee576ad96d279414fc0835ff31f637.1720022580.git.lorenzo@xxxxxxxxxx/#26110282 > Ok. The description needs to state the reason i.e., the reset_control_bulk_assert() is moved to make it pair with reset_control_bulk_deassert() in mtk_pcie_setup() and mtk_pcie_en7581_power_up(). Btw, could you explain why reset_control_bulk_deassert() is present in mtk_pcie_setup()? - Mani > > > > > Introduce PCIE_MTK_RESET_TIME_US macro for the time needed to > > > complete PCIe reset on MediaTek controller. > > > > > > Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx> > > > --- > > > drivers/pci/controller/pcie-mediatek-gen3.c | 28 ++++++++++++++++++++-------- > > > 1 file changed, 20 insertions(+), 8 deletions(-) > > > > > > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c > > > index 8c8c733a145634cdbfefd339f4a692f25a6e24de..1ad93d2407810ba873d9a16da96208b3cc0c3011 100644 > > > --- a/drivers/pci/controller/pcie-mediatek-gen3.c > > > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c > > > @@ -120,6 +120,9 @@ > > > > > > #define MAX_NUM_PHY_RESETS 3 > > > > > > +/* Time in us needed to complete PCIe reset on MediaTek controller */ > > > > No need of this comment. Macro name itself is explanatory. > > ack, I will fix it. > > Regards, > Lorenzo > > > > > - Mani > > > > > +#define PCIE_MTK_RESET_TIME_US 10 > > > + > > > /* Time in ms needed to complete PCIe reset on EN7581 SoC */ > > > #define PCIE_EN7581_RESET_TIME_MS 100 > > > > > > @@ -867,6 +870,14 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie) > > > int err; > > > u32 val; > > > > > > + /* > > > + * The controller may have been left out of reset by the bootloader > > > + * so make sure that we get a clean start by asserting resets here. > > > + */ > > > + reset_control_bulk_assert(pcie->soc->phy_resets.num_resets, > > > + pcie->phy_resets); > > > + reset_control_assert(pcie->mac_reset); > > > + > > > /* > > > * Wait for the time needed to complete the bulk assert in > > > * mtk_pcie_setup for EN7581 SoC. > > > @@ -941,6 +952,15 @@ static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie) > > > struct device *dev = pcie->dev; > > > int err; > > > > > > + /* > > > + * The controller may have been left out of reset by the bootloader > > > + * so make sure that we get a clean start by asserting resets here. > > > + */ > > > + reset_control_bulk_assert(pcie->soc->phy_resets.num_resets, > > > + pcie->phy_resets); > > > + reset_control_assert(pcie->mac_reset); > > > + usleep_range(PCIE_MTK_RESET_TIME_US, 2 * PCIE_MTK_RESET_TIME_US); > > > + > > > /* PHY power on and enable pipe clock */ > > > err = reset_control_bulk_deassert(pcie->soc->phy_resets.num_resets, pcie->phy_resets); > > > if (err) { > > > @@ -1013,14 +1033,6 @@ static int mtk_pcie_setup(struct mtk_gen3_pcie *pcie) > > > * counter since the bulk is shared. > > > */ > > > reset_control_bulk_deassert(pcie->soc->phy_resets.num_resets, pcie->phy_resets); > > > - /* > > > - * The controller may have been left out of reset by the bootloader > > > - * so make sure that we get a clean start by asserting resets here. > > > - */ > > > - reset_control_bulk_assert(pcie->soc->phy_resets.num_resets, pcie->phy_resets); > > > - > > > - reset_control_assert(pcie->mac_reset); > > > - usleep_range(10, 20); > > > > > > /* Don't touch the hardware registers before power up */ > > > err = pcie->soc->power_up(pcie); > > > > > > -- > > > 2.47.0 > > > > > > > -- > > மணிவண்ணன் சதாசிவம் -- மணிவண்ணன் சதாசிவம்
