Re: [PATCH v7 0/7] PCI: dwc: opitimaze RC Host/EP pci_fixup_addr()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 14, 2024 at 11:49:44AM -0500, Frank Li wrote:
> On Tue, Oct 29, 2024 at 12:36:33PM -0400, Frank Li wrote:
> 
> Mani:
> 	Do you have chance to check dwc part?
> 

Frank,

Sorry for the delay. I plan to look into this (and other series) tomorrow.

- Mani

> Frank
> 
> > == RC side:
> >
> >             ┌─────────┐                    ┌────────────┐
> >  ┌─────┐    │         │ IA: 0x8ff8_0000    │            │
> >  │ CPU ├───►│   ┌────►├─────────────────┐  │ PCI        │
> >  └─────┘    │   │     │ IA: 0x8ff0_0000 │  │            │
> >   CPU Addr  │   │  ┌─►├─────────────┐   │  │ Controller │
> > 0x7ff8_0000─┼───┘  │  │             │   │  │            │
> >             │      │  │             │   │  │            │   PCI Addr
> > 0x7ff0_0000─┼──────┘  │             │   └──► IOSpace   ─┼────────────►
> >             │         │             │      │            │    0
> > 0x7000_0000─┼────────►├─────────┐   │      │            │
> >             └─────────┘         │   └──────► CfgSpace  ─┼────────────►
> >              BUS Fabric         │          │            │    0
> >                                 │          │            │
> >                                 └──────────► MemSpace  ─┼────────────►
> >                         IA: 0x8000_0000    │            │  0x8000_0000
> >                                            └────────────┘
> >
> > Current dwc implimemnt, pci_fixup_addr() call back is needed when bus
> > fabric convert cpu address before send to PCIe controller.
> >
> >     bus@5f000000 {
> >             compatible = "simple-bus";
> >             #address-cells = <1>;
> >             #size-cells = <1>;
> >             ranges = <0x80000000 0x0 0x70000000 0x10000000>;
> >
> >             pcie@5f010000 {
> >                     compatible = "fsl,imx8q-pcie";
> >                     reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
> >                     reg-names = "dbi", "config";
> >                     #address-cells = <3>;
> >                     #size-cells = <2>;
> >                     device_type = "pci";
> >                     bus-range = <0x00 0xff>;
> >                     ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
> >                              <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
> >             ...
> >             };
> >     };
> >
> > Device tree already can descript all address translate. Some hardware
> > driver implement fixup function by mask some bits of cpu address. Last
> > pci-imx6.c are little bit better by fetch memory resource's offset to do
> > fixup.
> >
> > static u64 imx_pcie_cpu_addr_fixup(struct dw_pcie *pcie, u64 cpu_addr)
> > {
> > 	...
> > 	entry = resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM);
> > 	return cpu_addr - entry->offset;
> > }
> >
> > But it is not good by using IORESOURCE_MEM to fix up io/cfg address map
> > although address translate is the same as IORESOURCE_MEM.
> >
> > This patches to fetch untranslate range information for PCIe controller
> > (pcie@5f010000: ranges). So current config ATU without cpu_fixup_addr().
> >
> > == EP side:
> >
> >                    Endpoint
> >   ┌───────────────────────────────────────────────┐
> >   │                             pcie-ep@5f010000  │
> >   │                             ┌────────────────┐│
> >   │                             │   Endpoint     ││
> >   │                             │   PCIe         ││
> >   │                             │   Controller   ││
> >   │           bus@5f000000      │                ││
> >   │           ┌──────────┐      │                ││
> >   │           │          │ Outbound Transfer     ││
> >   │┌─────┐    │  Bus     ┼─────►│ ATU  ──────────┬┬─────►
> >   ││     │    │  Fabric  │Bus   │                ││PCI Addr
> >   ││ CPU ├───►│          │Addr  │                ││0xA000_0000
> >   ││     │CPU │          │0x8000_0000            ││
> >   │└─────┘Addr└──────────┘      │                ││
> >   │       0x7000_0000           └────────────────┘│
> >   └───────────────────────────────────────────────┘
> >
> > bus@5f000000 {
> >         compatible = "simple-bus";
> >         ranges = <0x80000000 0x0 0x70000000 0x10000000>;
> >
> >         pcie-ep@5f010000 {
> >                 reg = <0x5f010000 0x00010000>,
> >                       <0x80000000 0x10000000>;
> >                 reg-names = "dbi", "addr_space";
> >                 ...                ^^^^
> >         };
> >         ...
> > };
> >
> > Add `bus_addr_base` to configure the outbound window address for CPU write.
> > The BUS fabric generally passes the same address to the PCIe EP controller,
> > but some BUS fabrics convert the address before sending it to the PCIe EP
> > controller.
> >
> > Above diagram, CPU write data to outbound windows address 0x7000_0000,
> > Bus fabric convert it to 0x8000_0000. ATU should use BUS address
> > 0x8000_0000 as input address and convert to PCI address 0xA000_0000.
> >
> > Previously, `cpu_addr_fixup()` was used to handle address conversion. Now,
> > the device tree provides this information.
> >
> > The both pave the road to eliminate ugle cpu_fixup_addr() callback function.
> >
> > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > ---
> > Changes in v7:
> > - fix
> > | Reported-by: kernel test robot <lkp@xxxxxxxxx>
> > | Closes: https://lore.kernel.org/oe-kbuild-all/202410291546.kvgEWJv7-lkp@xxxxxxxxx/
> > - Link to v6: https://lore.kernel.org/r/20241028-pci_fixup_addr-v6-0-ebebcd8fd4ff@xxxxxxx
> >
> > Changes in v6:
> > - merge RC and EP to one thread!
> > - Link to v5: https://lore.kernel.org/r/20241015-pci_fixup_addr-v5-0-ced556c85270@xxxxxxx
> >
> > Changes in v5:
> > - update address order in diagram patches.
> > - remove confused 0x5f00_0000 range
> > - update patch1's commit message.
> > - Link to v4: https://lore.kernel.org/r/20241008-pci_fixup_addr-v4-0-25e5200657bc@xxxxxxx
> >
> > Changes in v4:
> > - Improve commit message by add driver source code path.
> > - Link to v3: https://lore.kernel.org/r/20240930-pci_fixup_addr-v3-0-80ee70352fc7@xxxxxxx
> >
> > Changes in v3:
> > - see each patch
> > - Link to v2: https://lore.kernel.org/r/20240926-pci_fixup_addr-v2-0-e4524541edf4@xxxxxxx
> >
> > Changes in v2:
> > - see each patch
> > - Link to v1: https://lore.kernel.org/r/20240924-pci_fixup_addr-v1-0-57d14a91ec4f@xxxxxxx
> >
> > ---
> > Frank Li (7):
> >       of: address: Add parent_bus_addr to struct of_pci_range
> >       PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
> >       PCI: dwc: ep: Add bus_addr_base for outbound window
> >       PCI: imx6: Remove cpu_addr_fixup()
> >       dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep
> >       PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext()
> >       PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
> >
> >  .../devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml | 38 ++++++++++++++-
> >  drivers/of/address.c                               |  2 +
> >  drivers/pci/controller/dwc/pci-imx6.c              | 46 +++++++++---------
> >  drivers/pci/controller/dwc/pcie-designware-ep.c    | 21 ++++++++-
> >  drivers/pci/controller/dwc/pcie-designware-host.c  | 55 +++++++++++++++++++++-
> >  drivers/pci/controller/dwc/pcie-designware.h       |  9 ++++
> >  include/linux/of_address.h                         |  1 +
> >  7 files changed, 148 insertions(+), 24 deletions(-)
> > ---
> > base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc
> > change-id: 20240924-pci_fixup_addr-a8568f9bbb34
> >
> > Best regards,
> > ---
> > Frank Li <Frank.Li@xxxxxxx>
> >

-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux