在 2024/11/11 00:44, Lukas Wunner 写道:
On Sun, Nov 10, 2024 at 06:12:09PM +0800, Shuai Xue wrote:
2024/11/10 01:52, Lukas Wunner:
On Fri, Nov 08, 2024 at 11:09:39AM +0800, Shuai Xue wrote:
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -19,6 +19,7 @@
#include <linux/types.h>
#include <linux/pm_runtime.h>
#include <linux/pci.h>
+#include <ras/ras_event.h>
#include "pciehp.h"
Hm, why does the TRACE_EVENT() definition have to live in ras_event.h?
Why not, say, in pciehp.h?
IMHO, it is a type of RAS related event, so I add it in ras_event.h,
similar to other events like aer_event and memory_failure_event.
I could move it to pciehp.h, if the maintainers prefer that location.
IMO pciehp.h makes more sense than ras/ras_event.h.
The addition of AER to ras/ras_event.h was over a decade ago with
commit 0a2409aad38e ("trace, AER: Move trace into unified interface").
That commit wasn't acked by Bjorn. It wasn't even cc'ed to linux-pci:
https://lore.kernel.org/all/1402475691-30045-3-git-send-email-gong.chen@xxxxxxxxxxxxxxx/
I can see a connection between AER and RAS, but PCI hotplug tracepoints
are not exclusively RAS, they might be useful for other purposes as well.
Note that pciehp is not just used on servers but also e.g. for Thunderbolt
on mobile devices and the tracepoints might come in handy to debug that.
Got it, will move it to pciehp.h
Wouldn't it be more readable to just log the event that occured
as a string, e.g. "Surprise Removal" (and "Insertion" or "Hot Add"
for the other trace event you're introducing) instead of the state?
Otherwise you see "ON_STATE" in the log but that's actually the
*old* value so you have to mentally convert this to "previously ON,
so now must be transitioning to OFF".
I see your point. "Surprise Removal" or "Insertion" is indeed the exact
state transition. However, I am concerned that using a string might make
it difficult for user space tools like rasdaemon to parse.
If this is parsed by a user space daemon, put the enum in a uapi header,
e.g. include/uapi/linux/pci.h.
Will do it.
How about adding a new enum for state transition? For example:
enum pciehp_trans_type {
PCIEHP_SAFE_REMOVAL,
PCIEHP_SURPRISE_REMOVAL,
PCIEHP_Hot_Add,
...
}
In that case, I'd suggest adding an entry to the enum for all the
ctrl_info() messages, i.e.
Link Up
Link Down
Card present
Card not present
Amend pciehp_handle_presence_or_link_change() with curly braces
around all the affected if-blocks and put a trace event next to the
ctrl_info() message.
Will do it.
Also, since these events are not pciehp-specific, I'd call the enum
something like pci_hotplug_event and the entries PCI_HOTPLUG_...
(or PCI_HP_... if you prefer short names). These trace events could
in principle be raised by any of the other hotplug drivers in
drivers/pci/hotplug/, not just pciehp.
I see. Will rename with PCI_HP_ prefix.
Thanks,
Lukas
Thank you for valuable comments.
Best Regards,
Shuai
