Re: [PATCH v3 4/4] PCI: qcom: Add Qualcomm SA8255p based PCIe root complex functionality

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 11/7/2024 12:45 AM, neil.armstrong@xxxxxxxxxx wrote:
Hi,

On 06/11/2024 23:13, Mayank Rana wrote:
On SA8255p ride platform, PCIe root complex is firmware managed as well
configured into ECAM compliant mode. This change adds functionality to
enable resource management (system resource as well PCIe controller and
PHY configuration) through firmware, and enumerating ECAM compliant root
complex.

Signed-off-by: Mayank Rana <quic_mrana@xxxxxxxxxxx>
---
  drivers/pci/controller/dwc/Kconfig     |   1 +
  drivers/pci/controller/dwc/pcie-qcom.c | 116 +++++++++++++++++++++++--
  2 files changed, 108 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index b6d6778b0698..0fe76bd39d69 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -275,6 +275,7 @@ config PCIE_QCOM
      select PCIE_DW_HOST
      select CRC8
      select PCIE_QCOM_COMMON
+    select PCI_HOST_COMMON
      help
        Say Y here to enable PCIe controller support on Qualcomm SoCs. The
        PCIe controller uses the DesignWare core plus Qualcomm-specific
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index ef44a82be058..2cb74f902baf 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -21,7 +21,9 @@
  #include <linux/limits.h>
  #include <linux/init.h>
  #include <linux/of.h>
+#include <linux/of_pci.h>
  #include <linux/pci.h>
+#include <linux/pci-ecam.h>
  #include <linux/pm_opp.h>
  #include <linux/pm_runtime.h>
  #include <linux/platform_device.h>
@@ -254,10 +256,12 @@ struct qcom_pcie_ops {
    * @ops: qcom PCIe ops structure
    * @override_no_snoop: Override NO_SNOOP attribute in TLP to enable cache
    * snooping
+  * @firmware_managed: Set if PCIe root complex is firmware managed
    */
  struct qcom_pcie_cfg {
      const struct qcom_pcie_ops *ops;
      bool override_no_snoop;
+    bool firmware_managed;
      bool no_l0s;
  };
@@ -1415,6 +1419,10 @@ static const struct qcom_pcie_cfg cfg_sc8280xp = {
      .no_l0s = true,
  };
+static const struct qcom_pcie_cfg cfg_fw_managed = {
+    .firmware_managed = true,
+};
+
  static const struct dw_pcie_ops dw_pcie_ops = {
      .link_up = qcom_pcie_link_up,
      .start_link = qcom_pcie_start_link,
@@ -1566,6 +1574,51 @@ static irqreturn_t qcom_pcie_global_irq_thread(int irq, void *data)
      return IRQ_HANDLED;
  }
+static void qcom_pci_free_msi(void *ptr)
+{
+    struct dw_pcie_rp *pp = (struct dw_pcie_rp *)ptr;
+
+    if (pp && pp->has_msi_ctrl)
+        dw_pcie_free_msi(pp);
+}
+
+static int qcom_pcie_ecam_host_init(struct pci_config_window *cfg)
+{
+    struct device *dev = cfg->parent;
+    struct dw_pcie_rp *pp;
+    struct dw_pcie *pci;
+    int ret;
+
+    pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
+    if (!pci)
+        return -ENOMEM;
+
+    pci->dev = dev;
+    pp = &pci->pp;
+    pci->dbi_base = cfg->win;
+    pp->num_vectors = MSI_DEF_NUM_VECTORS;
+
+    ret = dw_pcie_msi_host_init(pp);
+    if (ret)
+        return ret;
+
+    pp->has_msi_ctrl = true;
+    dw_pcie_msi_init(pp);
+
+    ret = devm_add_action_or_reset(dev, qcom_pci_free_msi, pp);
+    return ret;
+}
+
+/* ECAM ops */
+const struct pci_ecam_ops pci_qcom_ecam_ops = {
+    .init        = qcom_pcie_ecam_host_init,
+    .pci_ops    = {
+        .map_bus    = pci_ecam_map_bus,
+        .read        = pci_generic_config_read,
+        .write        = pci_generic_config_write,
+    }
+};
+
  static int qcom_pcie_probe(struct platform_device *pdev)
  {
      const struct qcom_pcie_cfg *pcie_cfg;
@@ -1580,11 +1633,52 @@ static int qcom_pcie_probe(struct platform_device *pdev)
      char *name;
      pcie_cfg = of_device_get_match_data(dev);
-    if (!pcie_cfg || !pcie_cfg->ops) {
-        dev_err(dev, "Invalid platform data\n");
+    if (!pcie_cfg) {
+        dev_err(dev, "No platform data\n");
+        return -EINVAL;
+    }
+
+    if (!pcie_cfg->firmware_managed && !pcie_cfg->ops) {
+        dev_err(dev, "No platform ops\n");
          return -EINVAL;
      }
+    pm_runtime_enable(dev);
+    ret = pm_runtime_get_sync(dev);
+    if (ret < 0)
+        goto err_pm_runtime_put;
+
+    if (pcie_cfg->firmware_managed) {
+        struct pci_host_bridge *bridge;
+        struct pci_config_window *cfg;
+
+        bridge = devm_pci_alloc_host_bridge(dev, 0);
+        if (!bridge) {
+            ret = -ENOMEM;
+            goto err_pm_runtime_put;
+        }
+
+        of_pci_check_probe_only();
+        /* Parse and map our Configuration Space windows */
+        cfg = gen_pci_init(dev, bridge, &pci_qcom_ecam_ops);
+        if (IS_ERR(cfg)) {
+            ret = PTR_ERR(cfg);
+            goto err_pm_runtime_put;
+        }
+
+        bridge->sysdata = cfg;
+        bridge->ops = (struct pci_ops *)&pci_qcom_ecam_ops.pci_ops;
+        bridge->msi_domain = true;
+
+        ret = pci_host_probe(bridge);
+        if (ret) {
+            dev_err(dev, "pci_host_probe() failed:%d\n", ret);
+            goto err_pm_runtime_put;
+        }
+
+        return ret;
+    }
+
      pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
      if (!pcie)
          return -ENOMEM;
@@ -1593,11 +1687,6 @@ static int qcom_pcie_probe(struct platform_device *pdev)
      if (!pci)
          return -ENOMEM;
-    pm_runtime_enable(dev);
-    ret = pm_runtime_get_sync(dev);
-    if (ret < 0)
-        goto err_pm_runtime_put;
-
      pci->dev = dev;
      pci->ops = &dw_pcie_ops;
      pp = &pci->pp;
@@ -1739,9 +1828,13 @@ static int qcom_pcie_probe(struct platform_device *pdev)
  static int qcom_pcie_suspend_noirq(struct device *dev)
  {
-    struct qcom_pcie *pcie = dev_get_drvdata(dev);
+    struct qcom_pcie *pcie;
      int ret = 0;
+    if (of_device_is_compatible(dev->of_node, "qcom,pcie-sa8255p"))

Can't you use if (pcie_cfg->firmware_managed) here instead ?
yes, although with firmware managed mode, struct qcom_pcie *pcie is not allocated, and just to get access to pcie_cfg for this check, I took this approach. I am thiking to do allocating struct qcom_pcie *pcie and using it in future if we need more other related functionality which needs usage of this structure for functionality like global interrupt etc.

Although if you still prefer to allocate struct qcom_pcie based memory to access pcie_cfg, then I can consider to update in next patchset. Please suggest.
+        return 0;
+
+    pcie = dev_get_drvdata(dev);
      /*
       * Set minimum bandwidth required to keep data path functional during
       * suspend.
@@ -1795,9 +1888,13 @@ static int qcom_pcie_suspend_noirq(struct device *dev)
  static int qcom_pcie_resume_noirq(struct device *dev)
  {
-    struct qcom_pcie *pcie = dev_get_drvdata(dev);
+    struct qcom_pcie *pcie;
      int ret;
+    if (of_device_is_compatible(dev->of_node, "qcom,pcie-sa8255p"))

Ditto

+        return 0;
+
+    pcie = dev_get_drvdata(dev);
      if (pm_suspend_target_state != PM_SUSPEND_MEM) {
          ret = icc_enable(pcie->icc_cpu);
          if (ret) {
@@ -1830,6 +1927,7 @@ static const struct of_device_id qcom_pcie_match[] = {
      { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 },
      { .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 },
      { .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 },
+    { .compatible = "qcom,pcie-sa8255p", .data = &cfg_fw_managed },
      { .compatible = "qcom,pcie-sa8540p", .data = &cfg_sc8280xp },
      { .compatible = "qcom,pcie-sa8775p", .data = &cfg_1_34_0},
      { .compatible = "qcom,pcie-sc7280", .data = &cfg_1_9_0 },

Thanks,
Neil

Regards,
Mayank




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux