On Mon, Oct 28, 2024 at 03:07:21PM +0100, Andrea della Porta wrote: > The RP1 is a MFD that exposes its peripherals through PCI BARs. This > schema is intended as minimal support for the clock generator and > gpio controller peripherals which are accessible through BAR1. > > Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx> > --- > .../devicetree/bindings/misc/pci1de4,1.yaml | 80 +++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 81 insertions(+) > create mode 100644 Documentation/devicetree/bindings/misc/pci1de4,1.yaml > > diff --git a/Documentation/devicetree/bindings/misc/pci1de4,1.yaml b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml > new file mode 100644 > index 000000000000..d66b2fc130d1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml > @@ -0,0 +1,80 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/misc/pci1de4,1.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: RaspberryPi RP1 MFD PCI device > + > +maintainers: > + - Andrea della Porta <andrea.porta@xxxxxxxx> > + > +description: > + The RaspberryPi RP1 is a PCI multi function device containing > + peripherals ranging from Ethernet to USB controller, I2C, SPI > + and others. > + The peripherals are accessed by addressing the PCI BAR1 region. > + > +allOf: > + - $ref: /schemas/pci/pci-ep-bus.yaml > + > +properties: > + compatible: > + additionalItems: true > + maxItems: 3 > + items: > + - const: pci1de4,1 > + > + '#interrupt-cells': > + const: 2 > + description: > + Specifies respectively the interrupt number and flags as defined > + in include/dt-bindings/interrupt-controller/irq.h. > + > + interrupt-controller: true > + > +unevaluatedProperties: false > + > +required: > + - compatible > + - '#interrupt-cells' > + - interrupt-controller > + - pci-ep-bus@1 > + > +examples: > + - | > + pci { > + #address-cells = <3>; > + #size-cells = <2>; > + > + rp1@0,0 { > + compatible = "pci1de4,1"; > + ranges = <0x01 0x00 0x00000000 > + 0x82010000 0x00 0x00 > + 0x00 0x400000>; Could you please have the 'ranges' in a single line as used everywhere? - Mani > + #address-cells = <3>; > + #size-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + pci_ep_bus: pci-ep-bus@1 { > + compatible = "simple-bus"; > + ranges = <0xc0 0x40000000 > + 0x01 0x00 0x00000000 > + 0x00 0x00400000>; > + dma-ranges = <0x10 0x00000000 > + 0x43000000 0x10 0x00000000 > + 0x10 0x00000000>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + rp1_clocks: clocks@c040018000 { > + compatible = "raspberrypi,rp1-clocks"; > + reg = <0xc0 0x40018000 0x0 0x10038>; > + #clock-cells = <1>; > + clocks = <&clk_rp1_xosc>; > + clock-names = "xosc"; > + }; > + }; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index ccf123b805c8..2aea5a6166bd 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -19384,6 +19384,7 @@ RASPBERRY PI RP1 PCI DRIVER > M: Andrea della Porta <andrea.porta@xxxxxxxx> > S: Maintained > F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml > +F: Documentation/devicetree/bindings/misc/pci1de4,1.yaml > F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml > F: Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml > F: include/dt-bindings/clock/rp1.h > -- > 2.35.3 > -- மணிவண்ணன் சதாசிவம்
