Hi Andrea,
On 10/28/24 16:07, Andrea della Porta wrote:
> RaspberryPi RP1 is a multi function PCI endpoint device that
> exposes several subperipherals via PCI BAR.
> Add a dtb overlay that will be compiled into a binary blob
> and linked in the RP1 driver.
> This overlay offers just minimal support to represent the
> RP1 device itself, the sub-peripherals will be added by
> future patches.
>
> Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx>
> ---
> NOTE: this patch should be taken by the same maintainer that will take
> "[PATCH v3 10/12] misc: rp1: RaspberryPi RP1 misc driver", since they
> are closely related in terms of compiling.
>
> MAINTAINERS | 1 +
> arch/arm64/boot/dts/broadcom/rp1.dtso | 61 +++++++++++++++++++++++++++
> 2 files changed, 62 insertions(+)
> create mode 100644 arch/arm64/boot/dts/broadcom/rp1.dtso
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 06277969a522..510a071ede78 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19383,6 +19383,7 @@ F: include/uapi/linux/media/raspberrypi/
> RASPBERRY PI RP1 PCI DRIVER
> M: Andrea della Porta <andrea.porta@xxxxxxxx>
> S: Maintained
> +F: arch/arm64/boot/dts/broadcom/rp1.dtso
> F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
> F: Documentation/devicetree/bindings/misc/pci1de4,1.yaml
> F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml
> diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso
> new file mode 100644
> index 000000000000..8d1bbf207a30
> --- /dev/null
> +++ b/arch/arm64/boot/dts/broadcom/rp1.dtso
> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/clock/raspberrypi,rp1-clocks.h>
> +
> +/dts-v1/;
> +/plugin/;
> +
> +/ {
> + fragment@0 {
> + target-path="";
> + __overlay__ {
> + compatible = "pci1de4,1";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + pci_ep_bus: pci-ep-bus@1 {
> + compatible = "simple-bus";
> + ranges = <0xc0 0x40000000
> + 0x01 0x00 0x00000000
> + 0x00 0x00400000>;
> + dma-ranges = <0x10 0x00000000
> + 0x43000000 0x10 0x00000000
> + 0x10 0x00000000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + rp1_clocks: clocks@c040018000 {
> + compatible = "raspberrypi,rp1-clocks";
> + reg = <0xc0 0x40018000 0x0 0x10038>;
shouldn't this be:
rp1_clocks: clocks@18000 {
reg = <0x00 0x00018000 0x0 0x10038>;
...
}
?
And for other nodes too...
~Stan
> + #clock-cells = <1>;
> + clocks = <&clk_rp1_xosc>;
> + clock-names = "xosc";
> + assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>,
> + <&rp1_clocks RP1_PLL_SYS>,
> + <&rp1_clocks RP1_CLK_SYS>;
> + assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE
> + <200000000>, // RP1_PLL_SYS
> + <200000000>; // RP1_CLK_SYS
> + };
> +
> + rp1_gpio: pinctrl@c0400d0000 {
> + compatible = "raspberrypi,rp1-gpio";
> + reg = <0xc0 0x400d0000 0x0 0xc000>,
> + <0xc0 0x400e0000 0x0 0xc000>,
> + <0xc0 0x400f0000 0x0 0xc000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
> + <1 IRQ_TYPE_LEVEL_HIGH>,
> + <2 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> + };
> + };
> +};
