Re: [PATCH v2] PCI: dwc: Fix resume failure if no EP is connected at some platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

> The dw_pcie_suspend_noirq() function currently returns success directly
> if no endpoint (EP) device is connected. However, on some platforms, power
> loss occurs during suspend, causing dw_resume() to do nothing in this case.
> This results in a system halt because the DWC controller is not initialized
> after power-on during resume.
> 
> Change call to deinit() in suspend and init() at resume regardless of
> whether there are EP device connections or not. It is not harmful to
> perform deinit() and init() again for the no power-off case, and it keeps
> the code simple and consistent in logic.

Applied to controller/dwc, thank you!

[01/01] PCI: dwc: Fix resume failure if no EP is connected at some platforms
        https://git.kernel.org/pci/pci/c/ec008c493c25

	Krzysztof




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux