[PATCH -v12 15/15] PCI: Don't shrink too much for hotplug bridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Otherwise may have problem later if we plug pcie cards with bridges.

Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
---
 drivers/pci/probe.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 118fe5b..f66f1b1 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -811,6 +811,7 @@ static int __devinit pci_bridge_check_busn_broken(struct pci_bus *bus,
 
 static unsigned int __devinit __pci_scan_child_bus(struct pci_bus *bus,
 						 int pass);
+#define HOTPLUG_BRIDGE_RESERVE_BUSNR 8
 /*
  * If it's a bridge, configure it and scan the bus behind it.
  * For CardBus bridges, we don't scan behind as the devices will
@@ -1019,6 +1020,11 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
 		/*
 		 * Set the subordinate bus number to its real value.
 		 */
+		if (dev->is_hotplug_bridge && child->busn_res.end > max &&
+		   (max - child->busn_res.start) < HOTPLUG_BRIDGE_RESERVE_BUSNR)
+			max = min_t(int, child->busn_res.start +
+					 HOTPLUG_BRIDGE_RESERVE_BUSNR,
+				    child->busn_res.end);
 		shrink_size = (int)child->busn_res.end - max;
 		pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
 		pci_bus_update_busn_res_end(child, max);
-- 
1.7.7

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux