Hi Andrea, On Wed, 23 Oct 2024 17:36:06 +0200 Andrea della Porta <andrea.porta@xxxxxxxx> wrote: > Hi Stephen, > > On 15:08 Wed 09 Oct , Stephen Boyd wrote: > > Quoting Andrea della Porta (2024-10-07 05:39:51) > > > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig > > > index 299bc678ed1b..537019987f0c 100644 > > > --- a/drivers/clk/Kconfig > > > +++ b/drivers/clk/Kconfig > > > @@ -88,6 +88,15 @@ config COMMON_CLK_RK808 > > > These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each. > > > Clkout1 is always on, Clkout2 can off by control register. > > > > > > +config COMMON_CLK_RP1 > > > + tristate "Raspberry Pi RP1-based clock support" > > > + depends on PCI || COMPILE_TEST > > > > A better limit would be some ARCH_* config. > > I've avoided ARCH_BCM2835 since the original intention is for this driver > to work (in the future) also for custom PCI cards with RP1 on-board, and not > only for Rpi5. Maybe depends on CONFIG_MISC_RP1 ? CONFIG_MISC_RP1 enables the RP1 PCI driver Best regards, Hervé
