Re: [PATCH v9 1/6] misc: Add support for LAN966x PCI device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 10, 2024 at 08:36:01AM +0200, Herve Codina wrote:
> Add a PCI driver that handles the LAN966x PCI device using a device-tree
> overlay. This overlay is applied to the PCI device DT node and allows to
> describe components that are present in the device.
> 
> The memory from the device-tree is remapped to the BAR memory thanks to
> "ranges" properties computed at runtime by the PCI core during the PCI
> enumeration.
> 
> The PCI device itself acts as an interrupt controller and is used as the
> parent of the internal LAN966x interrupt controller to route the
> interrupts to the assigned PCI INTx interrupt.
> 
> Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>
> Acked-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>	# quirks.c

> ---
>  drivers/misc/Kconfig          |  24 ++++
>  drivers/misc/Makefile         |   3 +
>  drivers/misc/lan966x_pci.c    | 215 ++++++++++++++++++++++++++++++++++
>  drivers/misc/lan966x_pci.dtso | 167 ++++++++++++++++++++++++++
>  drivers/pci/quirks.c          |   1 +
>  5 files changed, 410 insertions(+)
>  create mode 100644 drivers/misc/lan966x_pci.c
>  create mode 100644 drivers/misc/lan966x_pci.dtso
> 
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 3fe7e2a9bd29..8e5b06ac9b6f 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -610,6 +610,30 @@ config MARVELL_CN10K_DPI
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called mrvl_cn10k_dpi.
>  
> +config MCHP_LAN966X_PCI
> +	tristate "Microchip LAN966x PCIe Support"
> +	depends on PCI
> +	select OF
> +	select OF_OVERLAY
> +	select IRQ_DOMAIN
> +	help
> +	  This enables the support for the LAN966x PCIe device.
> +	  This is used to drive the LAN966x PCIe device from the host system
> +	  to which it is connected.
> +
> +	  This driver uses an overlay to load other drivers to support for
> +	  LAN966x internal components.
> +	  Even if this driver does not depend on these other drivers, in order
> +	  to have a fully functional board, the following drivers are needed:

I don't think "overlay" by itself has enough context to be useful as
help text.  Maybe "device tree" or similar hint?

Add blank lines between paragraphs or reflow into a single paragraph.

> +	    - fixed-clock (COMMON_CLK)
> +	    - lan966x-oic (LAN966X_OIC)
> +	    - lan966x-cpu-syscon (MFD_SYSCON)
> +	    - lan966x-switch-reset (RESET_MCHP_SPARX5)
> +	    - lan966x-pinctrl (PINCTRL_OCELOT)
> +	    - lan966x-serdes (PHY_LAN966X_SERDES)
> +	    - lan966x-miim (MDIO_MSCC_MIIM)
> +	    - lan966x-switch (LAN966X_SWITCH)
> +
>  source "drivers/misc/c2port/Kconfig"
>  source "drivers/misc/eeprom/Kconfig"
>  source "drivers/misc/cb710/Kconfig"

> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index dccb60c1d9cc..41dec625ed7b 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -6266,6 +6266,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0xa76e, dpc_log_size);
>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5020, of_pci_make_dev_node);
>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5021, of_pci_make_dev_node);
>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REDHAT, 0x0005, of_pci_make_dev_node);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, 0x9660, of_pci_make_dev_node);
>  
>  /*
>   * Devices known to require a longer delay before first config space access
> -- 
> 2.46.2
> 




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux