On Thu, Oct 03, 2024 at 12:16:42PM +0100, Robin Murphy wrote:
> On 2024-09-30 8:42 pm, Frank Li wrote:
> > For the i.MX95, configuration of a LUT is necessary to convert Bus Device
> > Function (BDF) to stream IDs, which are utilized by both IOMMU and ITS.
> > This involves examining the msi-map and smmu-map to ensure consistent
> > mapping of PCI BDF to the same stream IDs. Subsequently, LUT-related
> > registers are configured. In the absence of an msi-map, the built-in MSI
> > controller is utilized as a fallback.
> >
> > Additionally, register a PCI bus callback function enable_device() and
> > disable_device() to config LUT when enable a new PCI device.
> >
> > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > ---
> > change from v1 to v2
> > - set callback to pci_host_bridge instead pci->ops.
> > ---
> > drivers/pci/controller/dwc/pci-imx6.c | 133 +++++++++++++++++++++++++++++++++-
> > 1 file changed, 132 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> > index 94f3411352bf0..29186058ba256 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -55,6 +55,22 @@
> > #define IMX95_PE0_GEN_CTRL_3 0x1058
> > #define IMX95_PCIE_LTSSM_EN BIT(0)
> > +#define IMX95_PE0_LUT_ACSCTRL 0x1008
> > +#define IMX95_PEO_LUT_RWA BIT(16)
> > +#define IMX95_PE0_LUT_ENLOC GENMASK(4, 0)
> > +
> > +#define IMX95_PE0_LUT_DATA1 0x100c
> > +#define IMX95_PE0_LUT_VLD BIT(31)
> > +#define IMX95_PE0_LUT_DAC_ID GENMASK(10, 8)
> > +#define IMX95_PE0_LUT_STREAM_ID GENMASK(5, 0)
> > +
> > +#define IMX95_PE0_LUT_DATA2 0x1010
> > +#define IMX95_PE0_LUT_REQID GENMASK(31, 16)
> > +#define IMX95_PE0_LUT_MASK GENMASK(15, 0)
> > +
> > +#define IMX95_SID_MASK GENMASK(5, 0)
> > +#define IMX95_MAX_LUT 32
> > +
> > #define to_imx_pcie(x) dev_get_drvdata((x)->dev)
> > enum imx_pcie_variants {
> > @@ -82,6 +98,7 @@ enum imx_pcie_variants {
> > #define IMX_PCIE_FLAG_HAS_PHY_RESET BIT(5)
> > #define IMX_PCIE_FLAG_HAS_SERDES BIT(6)
> > #define IMX_PCIE_FLAG_SUPPORT_64BIT BIT(7)
> > +#define IMX_PCIE_FLAG_HAS_LUT BIT(8)
> > #define imx_check_flag(pci, val) (pci->drvdata->flags & val)
> > @@ -134,6 +151,7 @@ struct imx_pcie {
> > struct device *pd_pcie_phy;
> > struct phy *phy;
> > const struct imx_pcie_drvdata *drvdata;
> > + struct mutex lock;
> > };
> > /* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
> > @@ -925,6 +943,111 @@ static void imx_pcie_stop_link(struct dw_pcie *pci)
> > imx_pcie_ltssm_disable(dev);
> > }
> > +static int imx_pcie_add_lut(struct imx_pcie *imx_pcie, u16 reqid, u8 sid)
> > +{
> > + struct dw_pcie *pci = imx_pcie->pci;
> > + struct device *dev = pci->dev;
> > + u32 data1, data2;
> > + int i;
> > +
> > + if (sid >= 64) {
> > + dev_err(dev, "Invalid SID for index %d\n", sid);
> > + return -EINVAL;
> > + }
> > +
> > + guard(mutex)(&imx_pcie->lock);
> > +
> > + for (i = 0; i < IMX95_MAX_LUT; i++) {
> > + regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_ACSCTRL, IMX95_PEO_LUT_RWA | i);
> > +
> > + regmap_read(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA1, &data1);
> > + if (data1 & IMX95_PE0_LUT_VLD)
> > + continue;
>
> Maybe check if an existing entry already exists for the given RID?
>
> > + data1 = FIELD_PREP(IMX95_PE0_LUT_DAC_ID, 0);
> > + data1 |= FIELD_PREP(IMX95_PE0_LUT_STREAM_ID, sid);
> > + data1 |= IMX95_PE0_LUT_VLD;
> > +
> > + regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA1, data1);
> > +
> > + data2 = 0xffff;
> > + data2 |= FIELD_PREP(IMX95_PE0_LUT_REQID, reqid);
> > +
> > + regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA2, data2);
> > +
> > + regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_ACSCTRL, i);
> > +
> > + return 0;
> > + }
> > +
> > + dev_err(dev, "All lut already used\n");
> > + return -EINVAL;
> > +}
> > +
> > +static void imx_pcie_remove_lut(struct imx_pcie *imx_pcie, u16 reqid)
> > +{
> > + u32 data2 = 0;
> > + int i;
> > +
> > + guard(mutex)(&imx_pcie->lock);
> > +
> > + for (i = 0; i < IMX95_MAX_LUT; i++) {
> > + regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_ACSCTRL, IMX95_PEO_LUT_RWA | i);
> > +
> > + regmap_read(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA2, &data2);
> > + if (FIELD_GET(IMX95_PE0_LUT_REQID, data2) == reqid) {
> > + regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA1, 0);
> > + regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA2, 0);
> > + regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_ACSCTRL, i);
>
> ...plus then you could safely return early here.
>
> > + }
> > + }
> > +}
> > +
> > +static int imx_pcie_enable_device(struct pci_host_bridge *bridge, struct pci_dev *pdev)
> > +{
> > + u32 sid_i = 0, sid_m = 0, rid = pci_dev_id(pdev);
> > + struct imx_pcie *imx_pcie;
> > + struct device *dev;
> > + int err;
> > +
> > + imx_pcie = to_imx_pcie(to_dw_pcie_from_pp(bridge->sysdata));
> > + dev = imx_pcie->pci->dev;
> > +
> > + err = of_map_id(dev->of_node, rid, "iommu-map", "iommu-map-mask", NULL, &sid_i);
> > + if (err)
> > + return err;
> > +
> > + err = of_map_id(dev->of_node, rid, "msi-map", "msi-map-mask", NULL, &sid_m);
> > + if (err)
> > + return err;
> > +
> > + if (sid_i != rid && sid_m != rid)
>
> Perhaps it is reasonable to assume that i.MX95 will never have SMMU/ITS
> mappings for low-numbered devices on bus 0, but in general this isn't very
> robust, and either way it's certainly not all that clear at first glance
> what assmuption is actually being made here. If it's significant whether a
> mapping actually exists or not for the given ID then you should really use
> the "target" argument of of_map_id() to determine that.
let me do more research on this.
The key part is patch 1.
Frank
>
> > + if ((sid_i & IMX95_SID_MASK) != (sid_m & IMX95_SID_MASK)) {
> > + dev_err(dev, "its and iommu stream id miss match, please check dts file\n");
> > + return -EINVAL;
> > + }
> > +
> > + /* if iommu-map is not existed then use msi-map's stream id*/
> > + if (sid_i == rid)
> > + sid_i = sid_m;
> > +
> > + sid_i &= IMX95_SID_MASK;
>
> AFAICS this means that:
> a) the check in imx_pcie_add_lut() is useless, since if a mapping had an
> output ID larger than 63, then we've now just silently truncated the LUT
> entry to not match what the SMMU/ITS will still expect.
> b) if no mapping existed, then we're going to needlessly allocate a LUT
> entry anyway since the truncated RID now won't match the original.
You are right. It is my mistake.
>
> > +
> > + if (sid_i != rid)
> > + return imx_pcie_add_lut(imx_pcie, rid, sid_i);
> > +
> > + /* Use dwc built-in MSI controller */
>
> This comment seems out of place - how does returning 0 from here vs.
> returning 0 from imx_pcie_add_lut() achieve that? I don't see any obvious
> way for the LUT programming to influence the IRQ subsystem here :/
If msi-map is not existed. sid_i will equal to rid. imx_pcie_add_lut()
will be skipped. PCI controller still fallback to the dwc built-in's MSI
controller.
msi-map iommu-map
Y Y ITS + SMMU, require the same sid
Y N ITS
N Y DWC MSI Ctrl + SMMU
N N DWC MSI Ctrl. (current upstream state)
Return 0 here, it is N-N case.
>
> Thanks,
> Robin.
>
> > + return 0;
> > +}
> > +
> > +static void imx_pcie_disable_device(struct pci_host_bridge *bridge, struct pci_dev *pdev)
> > +{
> > + struct imx_pcie *imx_pcie;
> > +
> > + imx_pcie = to_imx_pcie(to_dw_pcie_from_pp(bridge->sysdata));
> > + imx_pcie_remove_lut(imx_pcie, pci_dev_id(pdev));
> > +}
> > +
> > static int imx_pcie_host_init(struct dw_pcie_rp *pp)
> > {
> > struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > @@ -941,6 +1064,11 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
> > }
> > }
> > + if (pp->bridge && imx_check_flag(imx_pcie, IMX_PCIE_FLAG_HAS_LUT)) {
> > + pp->bridge->enable_device = imx_pcie_enable_device;
> > + pp->bridge->disable_device = imx_pcie_disable_device;
> > + }
> > +
> > imx_pcie_assert_core_reset(imx_pcie);
> > if (imx_pcie->drvdata->init_phy)
> > @@ -1292,6 +1420,8 @@ static int imx_pcie_probe(struct platform_device *pdev)
> > imx_pcie->pci = pci;
> > imx_pcie->drvdata = of_device_get_match_data(dev);
> > + mutex_init(&imx_pcie->lock);
> > +
> > /* Find the PHY if one is defined, only imx7d uses it */
> > np = of_parse_phandle(node, "fsl,imx7d-pcie-phy", 0);
> > if (np) {
> > @@ -1587,7 +1717,8 @@ static const struct imx_pcie_drvdata drvdata[] = {
> > },
> > [IMX95] = {
> > .variant = IMX95,
> > - .flags = IMX_PCIE_FLAG_HAS_SERDES,
> > + .flags = IMX_PCIE_FLAG_HAS_SERDES |
> > + IMX_PCIE_FLAG_HAS_LUT,
> > .clk_names = imx8mq_clks,
> > .clks_cnt = ARRAY_SIZE(imx8mq_clks),
> > .ltssm_off = IMX95_PE0_GEN_CTRL_3,
> >
>
