On 9/30/2024 9:44 PM, Manivannan Sadhasivam wrote:
Currently, if global IRQ is supported by the platform, only the Link up
interrupt is enabled in the PARF_INT_ALL_MASK register. But on some Qcom
platforms like SM8250, and X1E80100, MSIs are getting masked due to this.
They require enabling the MSI interrupt bits in the register to unmask
(enable) the MSIs.
Even though the MSI interrupt enable bits in PARF_INT_ALL_MASK are
described as 'diagnostic' interrupts in the internal documentation,
disabling them masks MSI on these platforms. Due to this, MSIs were not
reported to be received these platforms while supporting global IRQ.
So enable the MSI interrupts along with the Link up interrupt in the
PARF_INT_ALL_MASK register if global IRQ is supported. This ensures that
the MSIs continue to work and also the driver is able to catch the Link
up interrupt for enumerating endpoint devices.
Fixes: 4581403f6792 ("PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt")
Reported-by: Konrad Dybcio <konradybcio@xxxxxxxxxx>
Closes: https://lore.kernel.org/linux-pci/9a692c98-eb0a-4d86-b642-ea655981ff53@xxxxxxxxxx/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Reviewed-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
Thanks,
Qiang
---
drivers/pci/controller/dwc/pcie-qcom.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index ef44a82be058..2b33d03ed054 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -133,6 +133,7 @@
/* PARF_INT_ALL_{STATUS/CLEAR/MASK} register fields */
#define PARF_INT_ALL_LINK_UP BIT(13)
+#define PARF_INT_MSI_DEV_0_7 GENMASK(30, 23)
/* PARF_NO_SNOOP_OVERIDE register fields */
#define WR_NO_SNOOP_OVERIDE_EN BIT(1)
@@ -1716,7 +1717,8 @@ static int qcom_pcie_probe(struct platform_device *pdev)
goto err_host_deinit;
}
- writel_relaxed(PARF_INT_ALL_LINK_UP, pcie->parf + PARF_INT_ALL_MASK);
+ writel_relaxed(PARF_INT_ALL_LINK_UP | PARF_INT_MSI_DEV_0_7,
+ pcie->parf + PARF_INT_ALL_MASK);
}
qcom_pcie_icc_opp_update(pcie);
