RE: [PATCH v2 3/4] PCI: imx6: Pass correct sub mode when calling phy_set_mode_ext()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Frank Li <frank.li@xxxxxxx>
> Sent: 2024年9月24日 2:59
> To: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>; Krzysztof Wilczyński
> <kw@xxxxxxxxx>; Manivannan Sadhasivam
> <manivannan.sadhasivam@xxxxxxxxxx>; Rob Herring <robh@xxxxxxxxxx>;
> Bjorn Helgaas <bhelgaas@xxxxxxxxxx>; Krzysztof Kozlowski
> <krzk+dt@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>; Abraham I
> <kishon@xxxxxxxxxx>; Saravana Kannan <saravanak@xxxxxxxxxx>; Jingoo
> Han <jingoohan1@xxxxxxxxx>; Gustavo Pimentel
> <gustavo.pimentel@xxxxxxxxxxxx>; Jesper Nilsson
> <jesper.nilsson@xxxxxxxx>; Hongxing Zhu <hongxing.zhu@xxxxxxx>; Lucas
> Stach <l.stach@xxxxxxxxxxxxxx>; Shawn Guo <shawnguo@xxxxxxxxxx>;
> Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>; Pengutronix Kernel Team
> <kernel@xxxxxxxxxxxxxx>; Fabio Estevam <festevam@xxxxxxxxx>
> Cc: linux-pci@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; imx@xxxxxxxxxxxxxxx; Krzysztof
> Wilczyński <kwilczynski@xxxxxxxxxx>; Frank Li <frank.li@xxxxxxx>
> Subject: [PATCH v2 3/4] PCI: imx6: Pass correct sub mode when calling
> phy_set_mode_ext()
> 
> Fix hardcoding to Root Complex (RC) mode by adding a drvdata mode check.
> Pass PHY_MODE_PCIE_EP if the PCI controller operates in Endpoint (EP)
> mode.
> 
> Fixes: 8026f2d8e8a9 ("PCI: imx6: Call common PHY API to set mode, speed,
> and submode")
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>

Reviewed-by: Richard Zhu <hongxing.zhu@xxxxxxx>

Best Regards
Richard Zhu
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> b/drivers/pci/controller/dwc/pci-imx6.c
> index 808d1f1054173..bdc2b372e6c13 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -961,7 +961,9 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
>  			goto err_clk_disable;
>  		}
> 
> -		ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE,
> PHY_MODE_PCIE_RC);
> +		ret = phy_set_mode_ext(imx_pcie->phy, PHY_MODE_PCIE,
> +				       imx_pcie->drvdata->mode ==
> DW_PCIE_EP_TYPE ?
> +						PHY_MODE_PCIE_EP : PHY_MODE_PCIE_RC);
>  		if (ret) {
>  			dev_err(dev, "unable to set PCIe PHY mode\n");
>  			goto err_phy_exit;
> 
> --
> 2.34.1





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux