PCI devices' parameters on the VMD bus have been programmed properly
originally. But, cleared after pci_reset_bus() and have not been restored
correctly. This leads the link's L1.2 between PCIe Root Port and child
device gets wrong configs.
Here is a failed example on ASUS B1400CEAE with enabled VMD. Both PCIe
bridge and NVMe device should have the same LTR1.2_Threshold value.
However, they are configured as different values in this case:
10000:e0:06.0 PCI bridge [0604]: Intel Corporation 11th Gen Core Processor PCIe Controller [8086:9a09] (rev 01) (prog-if 00 [Normal decode])
...
Capabilities: [200 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=45us PortTPowerOnTime=50us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
T_CommonMode=0us LTR1.2_Threshold=0ns
L1SubCtl2: T_PwrOn=0us
10000:e1:00.0 Non-Volatile memory controller [0108]: Sandisk Corp WD Blue SN550 NVMe SSD [15b7:5009] (rev 01) (prog-if 02 [NVM Express])
...
Capabilities: [900 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- L1_PM_Substates+
PortCommonModeRestoreTime=32us PortTPowerOnTime=10us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
T_CommonMode=0us LTR1.2_Threshold=101376ns
L1SubCtl2: T_PwrOn=50us
Here is VMD mapped PCI device tree:
-+-[0000:00]-+-00.0 Intel Corporation Device 9a04
| ...
\-[10000:e0]-+-06.0-[e1]----00.0 Sandisk Corp WD Blue SN550 NVMe SSD
\-17.0 Intel Corporation Tiger Lake-LP SATA Controller
When pci_reset_bus() resets the bus [e1] of the NVMe, it only saves and
restores NVMe's state before and after reset. Because bus [e1] has only one
device: 10000:e1:00.0 NVMe. The PCIe bridge is missed. However, when it
restores the NVMe's state, it also restores the ASPM L1SS between the PCIe
bridge and the NVMe by pci_restore_aspm_l1ss_state(). The NVMe's L1SS is
restored correctly. But, the PCIe bridge's L1SS is restored with the wrong
value 0x0. Becuase, the PCIe bridge's state is not saved before reset.
That is why pci_restore_aspm_l1ss_state() gets the parent device (PCIe
bridge)'s saved state capability data and restores L1SS with value 0.
So, save the PCIe bridge's state before pci_reset_bus(). Then, restore the
state after pci_reset_bus(). The restoring state also consumes the saving
state.
Link: https://www.spinics.net/lists/linux-pci/msg159267.html
Signed-off-by: Jian-Hong Pan <jhp@xxxxxxxxxxxxx>
---
v9:
- Drop the v8 fix about drivers/pci/pcie/aspm.c. Use this in VMD instead.
drivers/pci/controller/vmd.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index 11870d1fc818..2820005165b4 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -938,9 +938,16 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
if (!list_empty(&child->devices)) {
dev = list_first_entry(&child->devices,
struct pci_dev, bus_list);
+ /* To avoid pci_reset_bus restore wrong ASPM L1SS
+ * configuration due to missed saving parent device's
+ * states, save & restore the parent device's states
+ * as well.
+ */
+ pci_save_state(dev->bus->self);
ret = pci_reset_bus(dev);
if (ret)
pci_warn(dev, "can't reset device: %d\n", ret);
+ pci_restore_state(dev->bus->self);
break;
}
--
2.46.1
