Re: [PATCH v2 3/5] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 13, 2024 at 01:37:22AM GMT, Qiang Yu wrote:
> Currently driver supports only x4 lane based functionality using tx/rx and
> tx2/rx2 pair of register sets. To support 8 lane functionality with PCIe3,
> PCIe3 related QMP PHY provides additional programming which are available
> as txz and rxz based register set. Hence adds txz and rxz based registers
> usage and programming sequences. Phy register setting for txz and rxz will
> be applied to all 8 lanes. Some lanes may have different settings on
> several registers than txz/rxz, these registers should be programmed after
> txz/rxz programming sequences completing.
> 
> Besides, x1e80100 SoC uses QMP phy with version v6.30 for PCIe Gen4 x8.
> Add the new register offsets in a dedicated header file.
> 
> Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      | 211 ++++++++++++++++++
>  .../qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h    |  25 +++
>  drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_30.h |  19 ++
>  3 files changed, 255 insertions(+)
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h
>  create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_30.h
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

-- 
With best wishes
Dmitry




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux