On 9/12/2024 5:27 PM, Rafael J. Wysocki wrote:
On Thu, Sep 12, 2024 at 1:52 PM Krishna Chaitanya Chundru
<quic_krichai@xxxxxxxxxxx> wrote:
On 9/12/2024 5:12 PM, Rafael J. Wysocki wrote:
On Fri, Aug 16, 2024 at 10:45 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
[+cc Rafael, Mayank, Markus (when people have commented on previous
versions, please cc them on new versions). I'm still hoping Rafael
will have a chance to chime in]
On Mon, Jul 08, 2024 at 10:19:40AM +0530, Krishna chaitanya chundru wrote:
The Controller driver is the parent device of the PCIe host bridge,
PCI-PCI bridge and PCIe endpoint as shown below.
PCIe controller(Top level parent & parent of host bridge)
|
v
PCIe Host bridge(Parent of PCI-PCI bridge)
|
v
PCI-PCI bridge(Parent of endpoint driver)
|
v
PCIe endpoint driver
Now, when the controller device goes to runtime suspend, PM framework
will check the runtime PM state of the child device (host bridge) and
will find it to be disabled.
I guess "will find it to be disabled" means the child (host bridge)
has runtime PM disabled, not that the child device is disabled, right?
So it will allow the parent (controller
device) to go to runtime suspend. Only if the child device's state was
'active' it will prevent the parent to get suspended.
Can we include a hint like the name of the function where the PM
framework decides this? Maybe this is rpm_check_suspend_allowed()?
rpm_check_suspend_allowed() checks ".ignore_children", which sounds
like it could be related, and AFAICS .ignore_children == false here,
so .child_count should be relevant.
But I'm still confused about why we can runtime suspend a bridge that
leads to devices that are not suspended.
That should only be possible if runtime PM is disabled for those devices.
Since runtime PM is disabled for host bridge, the state of the child
devices under the host bridge is not taken into account by PM framework
for the top level parent, PCIe controller. So PM framework, allows
the controller driver to enter runtime PM irrespective of the state
of the devices under the host bridge. And this causes the topology
breakage and also possible PM issues like controller driver goes to
runtime suspend while endpoint driver is doing some transfers.
Why is it a good idea to enable runtime PM for a PCIe controller?
PCIe controller can do certain actions like keeping low power state,
remove bandwidth votes etc as part of runtime suspend as when we know
the client drivers already runtime suspended.
Surely they can, but enabling runtime PM for devices that have
children with runtime PM disabled and where those children have
children with runtime PM enabled is a bug.
we are trying to enable the runtime PM of host bridge here, so that we
can enable runtime PM of the controller.
If this change got accepted the child here(host bridge) runtime pm will
be enabled then i think there will no issue in enabling the runtime pm
of the controller then.
What does "topology breakage" mean? Do you mean something other than
the fact that an endpoint DMA might fail if the controller is
suspended?
So enable runtime PM for the host bridge, so that controller driver
goes to suspend only when all child devices goes to runtime suspend.
This by itself makes sense to me.
IIUC, the one-sentence description here is that previously, the PCI
host controller could be runtime suspended even while an endpoint was
active, which caused DMA failures. And this patch changes that so the
host controller is only runtime suspended after the entire hierarchy
below it is runtime suspended? Is that right?
Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
---
Changes in v4:
(Note: v4 applies cleanly to v6.10-rc1 and to v6.11-rc1 with a small
offset).
- Changed pm_runtime_enable() to devm_pm_runtime_enable() (suggested by mayank)
- Link to v3: https://lore.kernel.org/lkml/20240609-runtime_pm-v3-1-3d0460b49d60@xxxxxxxxxxx/
Changes in v3:
- Moved the runtime API call's from the dwc driver to PCI framework
as it is applicable for all (suggested by mani)
- Updated the commit message.
- Link to v2: https://lore.kernel.org/all/20240305-runtime_pm_enable-v2-1-a849b74091d1@xxxxxxxxxxx
Changes in v2:
- Updated commit message as suggested by mani.
- Link to v1: https://lore.kernel.org/r/20240219-runtime_pm_enable-v1-1-d39660310504@xxxxxxxxxxx
---
---
drivers/pci/probe.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8e696e547565..fd49563a44d9 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -3096,6 +3096,10 @@ int pci_host_probe(struct pci_host_bridge *bridge)
}
pci_bus_add_devices(bus);
+
+ pm_runtime_set_active(&bridge->dev);
+ devm_pm_runtime_enable(&bridge->dev);
+
return 0;
}
EXPORT_SYMBOL_GPL(pci_host_probe);
This will effectively prevent the host bridge from being
runtime-suspended at all IIUC, so the PCIe controller will never
suspend too after this change.
No we are having a different observations here.
Without this change the PCIe controller driver can go to runtime suspend
without considering the state of the client drivers i.e even when the
client drivers are active.
After adding this change we see the pcie controller is getting runtime
suspended only after the client drivers are runtime suspended which is
the expected behaviour.
OK, but then when and how is it going to be resumed?
sorry I am not expert of the pm framework here, what we observed is when
client drivers are trying to resume using runtime_get we see the
controller driver is also getting resume properly with this change.
let me dig in and see in code on how this is happening.
Bjorn has this view on this change in previous v2 version[1]
"My expectation is that adding new functionality should only require
changes in drivers that want to take advantage of it. For example, if
we add runtime PM support in the controller driver, the result should
be functionally correct even if we don't update drivers for downstream
devices.
If that's not the way it works, I suggest that would be a problem in
the PM framework.
The host bridge might be a special case because we don't have a
separate "host bridge" driver; that code is kind of integrated with
the controller drivers. So maybe it's OK to do controller + host
bridge runtime PM support at the same time, as long as any time we add
runtime PM to a controller, we sure it's also set up for the host
bridge"
[1] https://lore.kernel.org/all/20240307215505.GA632869@bhelgaas/
- Krishna Chaitanya.
