Re: [PATCH v2 3/8] arm64: dts: qcom: qcs6490-rb3gen2: Add node for qps615

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 09, 2024 at 05:21:22PM GMT, Krishna Chaitanya Chundru wrote:
> 
> 
> On 9/9/2024 4:59 PM, Caleb Connolly wrote:
> > Hi Krishna,
> > 
> > On 03/08/2024 05:22, Krishna chaitanya chundru wrote:
> > > Add QPS615 PCIe switch node which has 3 downstream ports and in one
> > > downstream port two embedded ethernet devices are present.
> > > 
> > > Power to the QPS615 is supplied through two LDO regulators, controlled
> > > by two GPIOs, these are added as fixed regulators.
> > > 
> > > Add i2c device node which is used to configure the switch.
> > > 
> > > Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> > > ---
> > >   arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 121 +++++++++++++++++++++++++++
> > >   arch/arm64/boot/dts/qcom/sc7280.dtsi         |   2 +-
> > >   2 files changed, 122 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> > > index 0d45662b8028..59d209768636 100644
> > > --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> > > +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> > > @@ -202,6 +202,30 @@ vph_pwr: vph-pwr-regulator {
> > >   		regulator-min-microvolt = <3700000>;
> > >   		regulator-max-microvolt = <3700000>;
> > >   	};
> > > +
> > > +	vdd_ntn_0p9: regulator-vdd-ntn-0p9 {
> > > +		compatible = "regulator-fixed";
> > > +		regulator-name = "VDD_NTN_0P9";
> > > +		gpio = <&pm8350c_gpios 2 GPIO_ACTIVE_HIGH>;
> > > +		regulator-min-microvolt = <899400>;
> > > +		regulator-max-microvolt = <899400>;
> > > +		enable-active-high;
> > > +		pinctrl-0 = <&ntn_0p9_en>;
> > > +		pinctrl-names = "default";
> > > +		regulator-enable-ramp-delay = <4300>;
> > > +	};
> > > +
> > > +	vdd_ntn_1p8: regulator-vdd-ntn-1p8 {
> > > +		compatible = "regulator-fixed";
> > > +		regulator-name = "VDD_NTN_1P8";
> > > +		gpio = <&pm8350c_gpios 3 GPIO_ACTIVE_HIGH>;
> > > +		regulator-min-microvolt = <1800000>;
> > > +		regulator-max-microvolt = <1800000>;
> > > +		enable-active-high;
> > > +		pinctrl-0 = <&ntn_1p8_en>;
> > > +		pinctrl-names = "default";
> > > +		regulator-enable-ramp-delay = <10000>;
> > > +	};
> > >   };
> > >   &apps_rsc {
> > > @@ -595,6 +619,12 @@ lt9611_out: endpoint {
> > >   			};
> > >   		};
> > >   	};
> > > +
> > > +	qps615_switch: pcie-switch@77 {
> > > +		compatible = "qcom,qps615";
> > > +		reg = <0x77>;
> > > +		status = "okay";
> > > +	};
> > >   };
> > >   &i2c1 {
> > > @@ -688,6 +718,75 @@ &pmk8350_rtc {
> > >   	status = "okay";
> > >   };
> > > +&pcie1 {
> > > +	status = "okay";
> > > +};
> > 
> > Isn't it also necessary to configure the phy as well? It's also default
> > disabled and has two regulators.
> > 
> There is one more patch series which does this.
> 
> https://lore.kernel.org/linux-arm-msm/20240207-enable_pcie-v1-1-b684afa6371c@xxxxxxxxxxx/T/
> 
> sorry for this I should have included this in cover letter.
> 
> I will squash those changes to this series or will update the cover
> letter.

It was sent in February, you have received feedback and several
suggestions on how to change it. After that you've never reposted it.

So, no, it is not possible to depend on that series or to include it in
this patchset. Please follow the thread and rework that patch.

> - Krishna Chaitanya.
> 

-- 
With best wishes
Dmitry




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux