From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
The PVU on the AM65 SoC is capable of restricting DMA from PCIe devices
to specific regions of host memory. Add the optional property
"memory-regions" to point to such regions of memory when PVU is used.
Since the PVU deals with system physical addresses, utilizing the PVU
with PCIe devices also requires setting up the VMAP registers to map the
Requester ID of the PCIe device to the CBA Virtual ID, which in turn is
mapped to the system physical address. Hence, describe the VMAP
registers which are optional unless the PVU shall be used for PCIe.
Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
---
CC: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
CC: "Krzysztof Wilczyński" <kw@xxxxxxxxx>
CC: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
CC: linux-pci@xxxxxxxxxxxxxxx
---
.../bindings/pci/ti,am65-pci-host.yaml | 29 +++++++++++++++++--
1 file changed, 26 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
index 0a9d10532cc8..0c297d12173c 100644
--- a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
@@ -20,14 +20,18 @@ properties:
- ti,keystone-pcie
reg:
- maxItems: 4
+ minItems: 4
+ maxItems: 6
reg-names:
+ minItems: 4
items:
- const: app
- const: dbics
- const: config
- const: atu
+ - const: vmap_lp
+ - const: vmap_hp
interrupts:
maxItems: 1
@@ -83,13 +87,30 @@ if:
compatible:
enum:
- ti,am654-pcie-rc
+
then:
+ properties:
+ memory-region:
+ maxItems: 1
+ description: |
+ phandle to a restricted DMA pool to be used for all devices behind
+ this controller. The regions should be defined according to
+ reserved-memory/shared-dma-pool.yaml.
+
required:
- dma-coherent
- power-domains
- msi-map
- num-viewport
+else:
+ properties:
+ reg:
+ maxItems: 4
+
+ reg-names:
+ maxItems: 4
+
unevaluatedProperties: false
examples:
@@ -104,8 +125,10 @@ examples:
reg = <0x5500000 0x1000>,
<0x5501000 0x1000>,
<0x10000000 0x2000>,
- <0x5506000 0x1000>;
- reg-names = "app", "dbics", "config", "atu";
+ <0x5506000 0x1000>,
+ <0x2900000 0x1000>,
+ <0x2908000 0x1000>;
+ reg-names = "app", "dbics", "config", "atu", "vmap_lp", "vmap_hp";
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <3>;
#size-cells = <2>;
--
2.43.0
