Re: [PATCH 03/11] PCI: of_property: Sanitize 32 bit PCI address parsed from DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[+cc Lizhi]

On Thu, Sep 05, 2024 at 06:43:35PM +0200, Andrea della Porta wrote:
> On 17:26 Tue 03 Sep     , Bjorn Helgaas wrote:
> > On Mon, Aug 26, 2024 at 09:51:02PM +0200, Andrea della Porta wrote:
> > > On 10:24 Wed 21 Aug     , Bjorn Helgaas wrote:
> > > > On Tue, Aug 20, 2024 at 04:36:05PM +0200, Andrea della Porta wrote:
> > > > > The of_pci_set_address() function parses devicetree PCI range
> > > > > specifier assuming the address is 'sanitized' at the origin,
> > > > > i.e. without checking whether the incoming address is 32 or 64
> > > > > bit has specified in the flags.  In this way an address with no
> > > > > OF_PCI_ADDR_SPACE_MEM64 set in the flags could leak through and
> > > > > the upper 32 bits of the address will be set too, and this
> > > > > violates the PCI specs stating that in 32 bit address the upper
> > > > > bit should be zero.
> > 
> > > > I don't understand this code, so I'm probably missing something.  It
> > > > looks like the interesting path here is:
> > > > 
> > > >   of_pci_prop_ranges
> > > >     res = &pdev->resource[...];
> > > >     for (j = 0; j < num; j++) {
> > > >       val64 = res[j].start;
> > > >       of_pci_set_address(..., val64, 0, flags, false);
> > > >  +      if (OF_PCI_ADDR_SPACE_MEM64)
> > > >  +        prop[1] = upper_32_bits(val64);
> > > >  +      else
> > > >  +        prop[1] = 0;
> ...
> > However, the CPU physical address space and the PCI bus address are
> > not the same.  Generic code paths should account for that different by
> > applying an offset (the offset will be zero on many platforms where
> > CPU and PCI bus addresses *look* the same).
> > 
> > So a generic code path like of_pci_prop_ranges() that basically copies
> > a CPU physical address to a PCI bus address looks broken to me.
> 
> Hmmm, I'd say that a translation from one bus type to the other is
> going on nonetheless, and this is done in the current upstream function
> as well. This patch of course does not add the translation (which is
> already in place), just to do it avoiding generating inconsistent address.

I think I was looking at this backwards.  I assumed we were *parsing"
a "ranges" property, but I think in fact we're *building* a "ranges"
property to describe an existing PCI device (either a PCI-to-PCI
bridge or an endpoint).  For such devices there is no address
translation.

Any address translation would only occur at a PCI host bridge that has
CPU address space on the upstream side and PCI address space on the
downstream side.

Since (IIUC), we're building "ranges" for a device in the interior of
a PCI hierarchy where address translation doesn't happen, I think both
the parent and child addresses in "ranges" should be in the PCI
address space.

But right now, I think they're both in the CPU address space, and we
basically do this:

  of_pci_prop_ranges(struct pci_dev *pdev, ...)
    res = &pdev->resource[...];
    for (j = 0; j < num; j++) {   # iterate through BARs or windows
      val64 = res[j].start;       # CPU physical address
      # <convert to PCI address space>
      of_pci_set_address(..., rp[i].parent_addr, val64, ...)
        rp[i].parent_addr = val64
      if (pci_is_bridge(pdev))
        memcpy(rp[i].child_addr, rp[i].parent_addr)
      else
        rp[i].child_addr[0] = j   # child addr unset/unused

Here "res" is a PCI BAR or bridge window, and it contains CPU physical
addresses, so "val64" is a CPU physical address.  It looks to me like
we should convert to a PCI bus address at the point noted above, based
on any translation described by the PCI host bridge.  That *should*
naturally result in a 32-bit value if OF_PCI_ADDR_SPACE_MEM64 is not
set.

> > Maybe my expectation of this being described in DT is mistaken.
> 
> Not sure what you mean here, the address being translated are coming from
> DT, in fact they are described by "ranges" properties.

Right, for my own future reference since I couldn't find a generic
description of "ranges" in Documentation/devicetree/:

[1] https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#ranges




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux